stator

1.The cutting edge of insulation paper should be neat, no damage, and free of burr
2.Primary qualification rate ≥99%, after rework, the rate ≥99.9%

1.Stator ID:30-55MM;Stator OD:50-95MM
2.Suitable for two pole stator insulation paper forming and cutting.
3.Automatic feeding, forming and cutting.

1.The insulation paper inserting machine is suitable for large and medium-size motors,
2.Automatic indexing, paper feeding and paper pushing.

This machine adopts movable winding inserting tooling with three working station. The working efficacy is very high with three working station

1.This stator coil end lacing machine is especially applied to multi sizes, low output or more lead stator winding lacing.
2.Control by touch screen

1.The stator coil lacing line adopts four working stations
2.auto feeding device, auto wire feeding device, auto knotting device, auto cutting device

1.With one winding head and two winding stations
2.Controlled by touch screen
3.Allow two wires winding simultaneously.
4.Adopts servo system

This lacing machine can do slot by slot lacing, interval lacing, and fancy lacing. All could be achieved by setting in human-machine interface lacing.

1.Primary qualification rate ≥99%
2.stop automatically when paper jams
3.adopts single hand system button
4.Production capacity ≤1s/slot

The motor inner stator winding machine is suitable for servo motors, electric toothbrush motors , brushless motors, stepping motors, fan motors,etc.

This winding inserting machine can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically.

This Stator Coil and Wedge Insertion Machine can insert the winding/coil and the wedge/top cover into the stator slot simultaneously.

1.Slot by slot lacing,interval lacing & fancy lacing could be achieved by setting in human-machine interface
2.fast speed,low noise,simple operation

1.Used for external armature winding.
2.High technical, stable performance and reasonable price.
3.Wire diameter:0.15~1.5mm; Stator OD:15~260mm.

It is applied to deep water pump motor and other various type of over length motor stator.
It can automatically insert coil and wedge into stator slo

1.Adjust the forming stack length by changing washer
2.Production capacity ≤13s/set
3.Adopt two hands simultaneously start button to ensure safety

This winding inserting machine can insert coil and wedge in the mid of slot into stator at a time; coil and wedge inserting is by servo system.

1.Designed for three phase motors
2.Support Ipad operaion.
3.With 3 winding working stations and 1coil inserting working station

This stator winding machine is suitable for table fan motor stator and external rotor winding machine.

1.Suitable exclusively for large and medium-size motors,inserting insulation paper automatically from bottom of stator slot.
2.Stator ID: φ70-φ150m

1.The brushless motor stator coil winding machine is suitable for servo motor stator coil making
2.The coil winder adopts needle inner winding design

.This series are economic machine for standard stators. The machines allow highest fill-factors and narrow slot openings.

This automatic motor winding machine is suitable for alternator and generator stator coil winding , especially suitable for automobile alternator .

1.With servo driven system,
2.Used for inserting coil and wedge into the stator slot simultaneously.
3.Can change speed and feeding mode.

1.The winding machine suitable for stators needs to do winding inserting by manual
2.It adopts two alternate spindles to facilitate higher output.

1. This motor stator coil forming machine is CE certificated.
2. With the light curtain, can protect operators froming injury during machine running.

1. Tester Max dimension: 850(width)*950(depth)*1870(height).
2. Two working position could rotary test.
3. Computer system with CPU1.3G.

1.Suitable for deep water pump motor and other various type of big dimension stator
2.PLC controlled
3.Use forklift for load and unload equipment

1. suitable for large and medium-size motors insulation paper cutting and inserting
2. MAX stator OD: 300mm
3.Max stator ID: 25mm
4. touch screen

1.The servo system machine accurately controls the lacing action.
2.Adapting industrial PLC,human-computer interface and horizontal frame-structure