st37 steel tube

1. Cold Drawn and Bright NBK
2. Black Phosphated
3. Caps covered at two ends

Material:TP304/304L, TP316/TP316L, TP310S, TP321, TP321H,TP347/TP347H.
Production standard: ASTM/ASME A213.

Tensile Strength: 490-630Mpa
Yield Strength: 355Mpa(min)
Elongation: 22% min
E355 N Phosphated Seamless Tube

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Stainless steel pipe of various connection methods, common types of pipe fittings - compression type, clamping type, live, push, push - threaded, soc

Stainless steel welded pipe, tube
Standards: ASTM, A554, A312, A249, A269, A270, A778,DIN11850,DIN17457,EN10296-2
Materials: 304, 304L, 316, 316L

Length:20FT/6meters fixed length, max: 24meters.
Production standard: ASTM/ASME A213.

High accuracy(+/-0.05mm)
Excellent surface condition(Ra<=1.0um)
ASTM A519 seamless carbon 1010
NBK seamless steel tube

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

304 stainless steel decorative pipe specifications 5.8m-6.0m, 200 mesh -600 molybdenum surface brightness

Welded 304 Stainless Steel tubing is less costly than seamless or welded-and-drawn tubing, and requires less stock removal in machining applications.

Cold Finished Seamless Hydraulic Steel tube
1. in full compliance with the EN 10305-4
2. Typical lengths available are 6m

1.O.D:20MM-219MM
2.W.T:0.5MM-11.75MM
3.LENGTH:5.8M,6M
4.SURFACE:ZINC COATING
5.STANDARD&MATERIAL:BS1387,Q195,Q235,Q345

Designed for critical and purity applications such as semiconductor manufacturing, GANYEAH high purity tubing delivery of gases, chemicals and solvent

Divided by the production method of stainless steel cold-rolled stainless steel tubes and hot-rolled stainless steel

The corresponding international standards include: ASTM A269, A312, A213, A511. JIS G3463, G3459, DIN17456 DIN17458 etc.

High accuracy(+/-0.05mm)
Excellent surface condition(Ra<=1.0um)
ASTM A519 seamless carbon 1010
NBK seamless steel tube

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Test:
Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT
Payment term:
30% T/T in advance

The best corrosion resistance of 316 stainless steel for offshore vessels, oil exploration equipment, facilities and

The inner angle and outer angle of square tubes are both sharp 90°;
Our raw materials are all from the largest steel factories in China and are of

DIN 2391 St37.4 NBK Steel Tube
1.OD Tolerance up to +/-0.03mm
2.ID roughness<0.8micron
3.no crack after flaring, can be bend

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Duplex Stainless Steel Piping:
Accommodate high steam pressure
Remove possibilities of process fluid leaks
Effectively protect against stress crack

Cold - rolled stainless steel pipe surface bright and white, processing methods : seamless and welded

Stainless steel pipe is the first choice for people now.
Fertilizer industry, chemical and petrochemical industry, power generation and environmenta

1.O.D:114MM-610MM
2.W.T:4MM-40MM
3.LENGTH:5M-12M
4.SURFACE:BLACK VARNISH OR ZINC COATING
5.STANDARD&MATERIAL:ASTM A106/A53 GR.B,API 5L GR.B

Cold Drawn Steel Tube 6mm Outside Diameter
1. BK,BKS,NBK
2. High precision on OD&ID steel tube
3. Ra<0.8micron

Heat Resistance: Generally, 2205 is not suitable for use at temperatures above 300°C as it suffers from precipitation of brittle micro-constituents.

Soft ferrite grain size on the annealing effect of yield strength of steel, you can see that has a linear relationship between grain diameter d and y