spring check valves

The valve which is called check valve horizontal one-way valve,which is used for screw compressor.
Application: Screw compressor service valve

high pressure
competitive price
good quality

1) Investment casting.
2) Competitive Prices
3) Prompt Delivery
4) Body and Filter Material:SS316, SS304, SS201, SS202

Size: DN40-600
Disc: CF8/ CF8M/ GGG40/ Al-Br
Seat: NBR/EPDM/PDFE /VITON
Working pressure: PN10/ 16

Pilot-operated reducing valve pressure control valve
Maximum Flow:63(1/m);100(1/m)
Maximum Pressure:31.5(Mpa)

JIS-marine- bronze swing check valve
F7371 5k25-40

with check valve magnetic suction filter series
INTRODUCTION
The series filters can be installed on the top or at the side of the tank.

Pressure:PN40
Size: DN15 ~ DN100 (1/2" - 4")
Materials:CF8M(AISI316) / CF8 (AISI304)

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

JIS Marine Bronze Lift Check Valve---F7356 5K to 16K

Double Check Valve
HV-CV11
Original No: 280809

Truck Single Check Valve
HV-CV08
Original No: 10200

check valve , valves , Cast swing check valve

Brass Swing Check Valve With Thread End
Material: Brass
Suitable for water
Specifications: 1/2" ~ 4"

K3V180DT Short check valve
Used in: K3V180DT hydraulic main pump
Part Number: 704550A

check valve , valves , Dual Plate Check Valve

check valve , valves , Forged Steel Check Valve

 
800 Series BS4504 PN10 / PN16 Flange Standard 2" - 24" Wafer Check Valve</sp

Check Valves Adapter
material:PP

1.Standard Porting pattern Sandwich plate design
2. Three different cracking pressures optional
3. A or B as leak-free blocking in channel

1. One or two actuator ports for leak free closure, optional
2. Vertical stacking assemblies
3. ISO and NFPA standard mounting

Bronze Y-strainer check valve with stainless steel filter.

Bronze swing check valve with bronze body and bonnect, brass swing.

Check valve

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

-With or without leakage port
-With or without pre-opening
-Type with pre-opening, dampened decompression
-3 opening pressures
-Subplate mounting

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection

Check valve controlled by fluid
For subplate mounting, Mounting pattern to DIN 24 340
Subplate or screw threaded connection