solenoid

Direct-action proportional solenoid series
Nominal Fluid Pressure:10(MPa)
Rated Current:0.7(mA)

Explosion isolation solenoid unloading valve
Specification : 03 06 10
working pressure(Mpa):5 10 20 31.5

Explosion isolation solenoid check valve
Specification 06(NG20) 10(NG30)
maximum pressure(Mpa) 31.5

koganei High quality solenoid valve Long service life and stable performance is the preferred choice of customers

electric solenoid water valve
1) brass material
2)stainless material
the voltage depend on your need, can be 12V-240V

1)High control accuracy
2)Prevents water hammer
3)Shortest Excitation Time:0.05 Second
4)Operation Type:Inside Pilot Type

The medium is 40 Micron Filtered Air.
Position and Way Number:Two-Position Five Way,Three-Position Five Way
Material:Aluminium Alloy

1). high degree of automatization.
2). All of our valves come with a warranty to give you a peace of mind.
3). easy to operate.

Normally Close Solenoid Valve

1. Micro solenoid valve.small solenoid valve,model MTT-06
2. Port Size: M5,Voltage:6V or 9V
3. pressure can be 3 bar or 6bar.
4.150MA /per min

Design for Vickers type directional hydraulic valves.
Rated Voltage:DC 12V/24V
NG6/CETOP5 type
Rated Pressure:21MPa
Insulation Class:F or H Class

Design for Vickers type directional hydraulic valves.
Rated Voltage:AC Solenoid 110V/220V
NG6 type
Insulation Class:Class H

Design for Vickers type directional hydraulic valves.
Rated Voltage:AC 110V/220V
NG10/CETOP5 type
Insulation Class:Class H

Solenoid valve:
1,High quality,long life cycle
2,Valve type:5/2,5/3 N.C and N.O
3,Acting:Pilot

we are the professional pneumatic solenoid valve manufacturers.

Plastic solenoid valve suit for water,gas,liquid
body material is reinforced nylon
Direct acting
SUIT FOR Gas, Water, Air, Oil (below 20cst),

1.Operating Temperature Rang:G1/8"-G3/8" -10~+150℃ ;G 3/8"-G 1/2" -5-+80℃
2.Material of Body: Brass
3.Material of Oil Seal: NBR

01V auto tansmission solenoid set
There are seven solenoids in one set
Fix for ZFautomatic transmission
suitable transmission code : 01V,5HP19

Solenoid Valves

pulse jet valve ,size:1" ,orifice:76mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

Design for Rexroth type directional hydraulic valves.
Normal Voltage:DC12/24V,AC110/220V
Full Stroke:≥6mm
Rated Stroke:2.8(3)mm

Standard:VDE0580
Design for Northman type directional hydraulic valves.
Certificate:CE
Rated Voltage:12/24V,RF120/240V
Rated Stroke:3mm

low power consumption ,exhaust for the pilot and main valve, small size ,large flow,good appearance ,flexible integrated installation,long life

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

Design for Rexroth type directional hydraulic valves.
Rated Voltage:DC12,24v AC110,220v
Rated Pressure:21MPa
Media:Oil

Design for Rexroth type directional hydraulic valves.
Standard:VDE0580
Rated Force:≥27N
Rated Stroke:2.8(3)mm
Full Stroke:≥6mm

Design for Rexroth type directional hydraulic valves.
Standard:VDE0580
Normal Voltage:12/24v;110/220v
IP Class:IP65(IP67or IP69 are also available)

Design for Northman type directional hydraulic valves.
Normal Voltage:120/220/240v
Rated Stroke:3mm
Insulation Class:F Class(Class H is available)

Design for Northman type directional hydraulic valves.
Rated Voltage:12/24v,RF120/240v
Rated Stroke:4mm
Full Stroke:≥8.5mm

This item is one of our Yuken Series produced according to ISO9001:2008 standards.
Rated Voltage:110/220V
Standard:VDE0580
Insulation Class:H Class