single mechanical seal

Used for Flygt pump no:2024/2066/2075/2101/3065/3080/Ready 24
Monolithic stationary faces

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤1.2MPa
Speed: ≤15m/s

wave spring seal CRMTN
Equal:burgmann type M7N
Temprature:-20℃to +190℃
Pressure:<1.2Mpa
Speed:<15m/s

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta.

Operating Limits:
1. Pressure: ≤ 0.5Mpa
2. Speed: ≤ 10m/s
3. Temperature: -20 to 100 degree celsius

Die casting/Sand Casting/Investment Casting/automobile parts/Machining Parts
Applications:Clean water,sewage water,oil and other moderately corrosi

Technic parameter
work heat:0 -- 2.0MPa (monolayer piece);0 -- 3.5MPa (double-deck piece)
work temperature:-75℃ -- 260℃

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤2.5MPa
Speed: ≤15m/s

O-ring Mechanical Seal CR82
temperature:-20℃ to +180℃
Pressure:<<1.2mpa
Speed:<<15m/s

It to suit I.M.O pump with size 22mm. pump mechanical seal parts for triple rotors screw pump
fuel oil supply system for ship in marine.

Used for Flygt pump no:2070/2102-040/3082
Supplied with removable setting clip

1.Stationary ring(carbon/SIC/TC)
2.Rotary ring(SIC/TC)
3.Secondary seal(NBR/EPDM/VITON)
4.Spring&Metal parts(SUS304/SUS316)

Operational Conditions:
Temperature: -20℃ to +180℃
Pressure: ≤2.5MPa
Speed: ≤15m/s

Replace SEALOL Type 1527 Seal. a typical large-spring mechanical seal with internal single-end single-spring non-equilibrium drive.

Used for Flygt pump no:2004/2008/2012/2016/2050/2052/Ready8/Ready 12/Ready 16

1. Stationary ring: ceramic/SIC/TC
2. Rotary ring: carbon/SIC/TC
3. Secondary seal: NBR/EPDM/VITON
4. Spring&Metal parts: steel

Cartridge Mechanical Seal
material :B,v1,Q1,Q2,U1,U2

AZM74A mechanical seal
For industrial pumps
Replacing the mechanical seal of Burgmann M74-D

Pressure:≤0.5MPa
Stationary Ring:Silicon Carbide Reaction Bonded,Ceramic(Alumina)
Rotary Ring:Teflon,Silicon Carbide Reaction Bonded

Stationary ring (ceramic/SIC/TC)
Rotary ring (carbon/SIC/TC)
Secondary seal (NBR/EPDM/VITON)
Spring&Metal parts (steel)

Single -Spring Seal CR1527 Mechanical Seal
temperature:-20℃ to +180℃
Pressure;<<1 Mpa
Speed:<<15m/s

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2135/ 2151/2201/3126/45440/4451. 35MM MECHANICAL SEALS FOR GRIPOC PUMPS

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s

Cartidge mechanical seals L9
which is equivalent to AES CS
Temperature:-50℃ to 204 ℃
pressure:≤1.1Mpa
speed:≤15m/s

1. burgmann mechanical seal
2. used in centrifugal pumps,agitator and other equipments
3. OEM offered

Replacement to:
Burgmann MG1 seal / MG12 seal /MG13 seal/MGS20 seal & G60 stationary
Aesseal B02/B012/B013 seal

Replace JOHN CRANE TYPE 8B2 SEAL. This seals work In Mechanical Pump Seal D574518. armstrong pumps mechanical seal.It raplacement flowserve RA seals

Cauldron-using mechanical seal 204
Pressure:0.1-0.25MPa
Speed: > 5m/s
Temperature: -40 to 200 ℃

Cup Gasket: NBR/EPDM/VITON
Stationary Ring: carbon/SIC/TC
Rotary Ring: ceramic/SIC/TC
Bellows: NBR/EPDM/VITON
Spring: SUS304/SUS316

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s