single mechanical seal

1. Pure Flexible Graphite die formed
2. Good thermo resistance to handle high temperature
3. Good chemical resistance
4. Great economic material

Rotary Ring:Carbon, Silicon Carbide,TC
Secondary Seal:NBR,EPDM,Viton
Spring and Metal Parts:Steel

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

.we are machanical seal manufacture.
.good price and high qulity
.promot delievery and long time life

Temperature:-20℃ to +180℃
replace the mechanical seal of John Crane 8B1T

 
Our products can replace the mechanical seals produced by Burgmann and John Crane and be widely used in petroleum, chemistry, refi

Elastic gasket: SUS304/SUS316
Retainer: Bronze H68/SUS304
Sealing gasket: NBR/EPDM/VITON
Stationary ring: Carbon

ISP C2100 elastomer bllow mechanical seal
the same as the original item;

o-ring used for mechanical seal
mainly uses American Standard
material : VIT,NBR,EPR,PTFE
Colour :black ,brown, green

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30 to 200 degree celsius

.High load supporting capacity
.low friction characteristic
.Good dust-proof capability

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s

we can make mechanical seals equal to GF pump seals.
Type: CR1,CR2,CR3,CR4
Material:SIC,TC,Carbon,Viton rubber,SS304, SS316

Burgmann AK5M wave spring mechanical seal
temperature:-20℃~+180℃
pressure:≤1.2Mpa
speed:≤15m/s

Trademark:dyseals;Certificate:ISO9001-2000,TS16949;

1.Pressure: up to 1Mpa
2.Speed: 13m/s
3.Temperature: -30 to 200 degrees celsius

Sintered in HIP Furnace
ISO9001:2000 Certificate
Material in Fine Grain Size

We could design and manufacture pump seals as your requirement.Of course,we promise our price is very competitive and the quality is high

Cartex-S  SIZE(25mm-100mm) for all kinds of pumps/Cartridge Mechanical Seal
<

saleseal at hotmail dot com
Could be equivalent to Shijiazhuang Industrial Pump Factory Co., Ltd mechanical seals

Operating Limits:
Pressure:1.2MPa
Speed:10m/s
Temperature:-30--200
Material Combined:...

Gasket

OEM

Balance seal compensates for higher pressures by locating faces such that stuffing box pressure has less effect on face closure.

AS-R37G, to replace M37/M37G seal. Conical spring design.

we are the manufacture that producing all kings of seal like that O-ring mechanical seals series ,Elastomer Bellow shaft seals ,Grundfos mechanical se

Tianjin Royal Industrial Seal Co., Ltd could provide equivalent JOHN CRANE or GRUNDFOS mechanical seals. We are a professional sealing company.

Temperature:-20℃ to +180℃
Pressure: ≤2.5MPa
Speed: ≤15m/s

Operating Limits:
Pressure:10MPa
Speed:10m/s
Temperature:-20--200

Johncrane JCS1F and Burgmann LP seal, it is integrated seal for Sulzer pumps.SULZER (SURPLUS) PUMP PARTS JOHNCRANE SAFEMATIC MECHANICAL SEAL