single mechanical seal

Grunfos seals kit. used water pumps Mechanical seals. Shaft size -22mm . It Suit for CR2. CR,4,CRK2,CRK4;SPK2,SPK4 pumps.

used in water pumps and household pumps

can replace the mechanical seal of Burgmann M37
Rotary Ring:Carbon, Silicon Carbide

1)Dependent of direction of rotation
2) Single seal, Unbalanced,
3) replace Burgman BT-FN Seal

AES-W01-TL Mechanical Seal
temperature:-40℃ to +200℃
Pressure:<<0.8 Mpa
Speed:<<18m/s

wave spring mechanical seals CR68D
equal:AES type W03S
temperature:-40℃ to +200℃
Pressure:<<0.8 Mpa
Speed:<<18m/s

Hilge Sanitary pumps rely on a variety of seals to perform pumping applications with custom seals available for specific applications.

30MM 48MM 63MM JOHNSON PUMP SEAL WAVE SPRING
JH-TW-30
JH-TW-48
JH-TW-63

used for water pumps

medium: water, oil and other low corrosive mediums, etc
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20~150 degree celsius

Hangzhou Sealcon Fluid Machinery CO.,Ltd was established in 2011,with Sealcon trademark we specialized in mechanical seal design.

Operating limits
Specification:24~100mm
Pressure:≤2.5MPa
Temperature:-30℃~200℃
Linear speed:≤25m/s

Corrosion resistant Chemical Pumps
SD/SL Pumps mechanical seal
WB3-25mm PTFE Teflon bellows mechanical seals For Corrosion resistant Chemical pumps

Working Conditions:
Mediums: Water, oil, weak acid, weak alkali, , etc.

1.we have seals in stock
2.the scales are various
3.you can order ahead of time

1. medium: water,oil and weakly-corrosive mediums,etc
2. pressure: within 0.8Mpa
3. speed: within 10m/s
4. Temperature: -20 to 150 degree celsius

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30 to 200 degree celsius

Applied for household pumps, water pumps and submerisble pumps.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20 to 100 degree celsius

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

Specifications
1. material: Stainless steel
2. Annular seal pressure: P≤1.7Mpa
3. Annular seal temperature: T=-50°C-250°C
4. Velocity: Vg≤25m/s

It has excellent corrosion resistance performance, selflubricityiy, high coefficient of heat conductivity, small expansion coefficient.

C515E metal bellow mechanical seal
for general-purpose applications
a standard for low-temperature applications

saleseal at hotmail dot com
Could be equivalent to SHARPE seals of following type of Mixers
60SV35M-5.45
50SV30M-6.45
40SV30M-6

Total solid%: <35%
Temperature :< 75ºC
Pressure: <1.6MPa
Line speed: <10m/s
Rotating ring: SiC...