sheet and strip

duplex stainless steel flange round bar wire rod fasteners tube pipe fittings forging plate sheet coil strip
nickel alloy steel flange round bar wir

Quality Zirconium and Zirconium alloys

Inconel 625 Sheet Plate Strip has the best all-round combination of strength and corrosion resistance of the Inconel family of alloys.Thic:min 0.05mm

Quality Tungsten and Tungsten alloys

Inconel 600 sheet plate: Better corrosion resistance than Nickel 99.2 (alloy200), especially corrosion resistant to dry chlorine and chlorine hydride.

Inconel 725 Sheet:Designed to resist a wide range of severely corrosive environments, pitting & crevice corrosion. Resistant to hydrogen embrittlement

Nickel 233 sheet is a commercially pure wrought nickel alloy combining excellent corrosion resistance with high electrical and thermal conductivities.

Nickel 205 sheet (Plate) is mostly used for the anodes and grids of electronic valves, magnetostrictive transducers, lead sheets, battery cases, etc.

Inconel 783 Sheet: low coefficient of thermal expansion,low expansion, high strength and excellent resistance to oxidation.
Thickness: Min0.05mm

Inconel 706 Sheet:high mechanical strength and good fabricability, resistance to oxidation,corrosion and weld strain-age cracking.Thickness: Min0.05mm

Incoloy alloy 925 wire combines the high strength of a precipitation-hardenable alloy with the excellent corrosion resistance. Thickness:0.05mm above

Incoloy 864 Sheet:thermal stability and resistance to fatigue ,salt corrosion, pitting and chloride stress-corrosion cracking.Thickness: Min0.05mm

Invar 36 sheet: nickel-iron alloy 36: possessing a rate of thermal expansion one-tenth that of carbon steel at temperatures up to at 400ºF(204ºC).

Inconel 751 Sheet:a nickel-chromium alloy,has excellent physical, mechanical,resist attacking and corrosion-resistance properties.Thickness: Min0.05mm

Inconel 690 Sheet has excellent corrosion resistance,high strength, good metallurgical stability and favourable fabrication.Thickness: Min0.05mm

5 Alloy Sheet: corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and organic acids. Sheet Thickness: 0.05mm and above

Highly resistant to chemical corrosion & oxidation; high stress-rupture strength & low creep rates under high stresses at temperatures up to 1500°F.

Monel R-405 Sheet:good corrosion-resistance,weld ability and high strength.resistant to sea water,steam salt and caustic solutions.Thickness:Min0.05mm

Copper Nickel CuNi6 Sheet is a Cu-Ni resistance alloy ,this alloy has low electrical resistivity and is solderable strip: Thickness:0.05mm above.

Nitinol alloys exhibit two closely related and unique properties: shape memory and super-elasticity (also called pseudo-elasticity).

Incoloy 832 Sheet: can replace higher nickel products ,developed for domestic and industrial sheathed heater applications.Thickness: Min0.05mm

Alloy 902 Sheet is a nickel-iron-chromium alloy made precipitation hardenable by additions of aluminum and titanium.Sheet Thickness: 0.05mm and above.

Alloy 30 Sheet:especially characterized by low resistivity and high corrosion resistance.And used for low-value resistors, for heating sheets and mats

Inconel 050 Sheet (Plate Strip):service in deep sour gas well environments,resistance to corrosion and stress cracking.Thickness: Min0.5mm

Incoloy 330 Sheet:good high-temperature strength and corrosion resistance.Solid solution composition and not enable by heat treatment.Thick: Min0.05mm

Inconel MA754 Sheet is nickel-chromium alloy with excellent strength, corrosion resistance and micro-structural stability. Thickness: Min0.05mm

90/10 Copper Nickel Alloy Sheet Plate Strip:Excellent Resistance to Corrosion and Bio Fouling in Sea Water, high resistance to sea water environments.

Incoloy 25-6HN Sheet:a super-austenitic stainless steel,it's thermal stability and it can resistant to stress corrosion cracking.Thickness: Min0.05mm.

15 Alloy Sheet: the temperature coefficient of resistance is low. It can be used as general resistance sheet and core of low temperature heaters.

Copper Nickel 10 Alloy Sheet Plate Strip: Resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.