sectional garage door

Commercial adjustable hinge
Bright zinc plated steel
14GA roller carrier
14 Ga base plate
mounting holes on 3" center vertically...

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

GDP1020
DEC: Central Hinges
Thickness:2.50mm
For use with 11mm diameter roller
Finish: zinc plated

EXHAUST PORT
USE ON INSULATED DOOR PANELS-2" MAX, THICKNESS
3" INSIDE DIAMETER
INCLUDES FASTENERS & GASKETS
POLISHED ALUMINUM FINISH

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

DEC: Ferrule
For use with fixing bearing
Parts used in garage door, overhead door, residential garage door, commercial garage door, industrial garag

2 5/8" spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

SWIVEL LATCH,BRIGHT ZINC PLATED STEEL 12 GUAGE HANDLE,14 GAUGE BASE PLATE,USE WITH AUTOLATCHES AND KEYED T HANDLES, USING

Cable size
3/32"7X7
1/8"7X7
1/8"7X19
5/32"7X19...

2" 11 BALL NYLON TIRE ROLLER WITH ZINC PLATED STEM
4" STEM ( WORKING LENGTH=3 1/4" ) ,BULGED SHOULDER
WHITE NYLON TIRE FOR QUIET OPERATION

For Overhead Garage Door, Industrial Garage doors, Residential garage doors,Commercial garage door parts, sectional garage door parts, Rolling garage

DEAD BOLT DIECAST CASE
100 KEY CODES AVAILABLE
POWDER COATED ZINC CASE
COMPLETE WITH REQUIRED MOUNTING HARDWARE
QUALITY 5 PIN TUMBLE

Cable size
3/32"7X7
1/8"7X7
1/8"7X19
5/32"7X19...

Adjust Bracket
DEC:Adjust Bracket
Thickness:4.0mm
Finish:zinc plated

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

Side Hinges
Thickness 2.0mm
for use with 11 mm diameter rollers
Zinc Plated finished

handle Lock
handle lock with one word key
zinc plated
bright chrome finished

handle Lock
handle lock with one word key
zinc plated
bright chrome finished

DEC:4" Pulley
The pulley is made of 2 times 1.2mm cold rolled
steel riveted together,6 rivets proportionally spaced
lnner ring heat treated

DEC:Residential Inside Slide Latch
Include cases,bar,spring and screws
Case:2mm steel. Bar:4mm steel
The center line of the fixing holes is 8

PUSHER SPRINGS 15"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 15".6" COMPRESSION

BUSHING, FLAGED NYLON 1" BORE 2" OD INNER RACE OFFSET : 7/32" FROM BEARING PLATE FOR CENTER SUPPORT ONLY

Description: Porosity Bottom Bracket
The bracket has left and right sides
Thickness:2.3 mm, Finish: zinc plated

2" SEALED NYLON ROLLER WITH ZINC PLATED STEM
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER
WHITE NYLON TIRE FOR QUIET OPERATION

4#Hinge
GDP1004
DEC:3#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

Residential Top brackets
For use with double track door and suitable for 11mm shaft
Thickness:2.5mm
Finish:zinc plate

Adjustable top rollers
top bracket with rollers
bright zinc plated 12 Gauge, 2" 11 ball nylon rollers
roller rating :75 lb load@15000 12" door cycl

USE ON NON INSULATED DOOR PANELS
3" INSIDE DIAMETER
INCLUDES FASTENER & GASKETS

Industrial top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5m