screws barrels

Borche machine screw barrel
Bimetallic or 96h Nitrided
Size: Dia Min14mm to Max500mm, Max8000mm long

1.Apply for Battenfeld injection molding machines
2.Good design,Long working life
3.Clamping force:25-3200tons

1.Professional design
2.High quality 38CrMoALA
3.Nitrided treatment
4.High quality and low price

96H Nitriding screw and barrel, can be used for general use with glass fiber less than 15%
If your glass fiber is high, we recommend Bimetallic

1.parallel twin screw & barrel
2.GBT 19001-2008/ISO9001:2008/SGS approved
3.Material:38CrMoAlA alloy steel
4.;length:only about 200 mm

1)Apply for rubber and Silica Gel products
2)Nitriding more than 120 hours
3)Factory direct price

1.screw and barrel
2.material:alloy-steel of high quality
3.processed to drawing or your request on output&raw material

96H Nitriding screw and barrel, can be used for general use with glass fiber less than 15%
If your glass fiber is high, we recommend Bimetallic

1.Application:ABS,PVC,PP/PE,PET,Engineering Plastic,GF,ect
2.extruder bimetallic screw barrel
3.Certificates:ISO9001:2008/SGS
4.high quality

1)Extruder/Injection/Rubber/Planet screw barrel
2)Precise and durable
3)Factory direct price

1.bimetallic screw barrel extruder
2.Nitriding/Bimetallic/Chrome/Tungsten
3.Certificates:GBT 19001-2008/ISO9001:2008/SGS

1.Professional design
2.High quality alloy steel: 38CrMoALA
3.Heat-treatment:Nitrided
4.Hardness:≥900Hv

1. Special design for UPVC, Soft-PVC
2. Special material with chrome-plating on screw

1. Diameter of screw: D12-D360mm
2. L/D ratio of screw: 1:10 - 1:50
3.ISO 9001:2008 approved

1.blow film machine screw barrel
2.Base Material:38CrMoAlA,42CrMo,SKD61,GH113,etc.
3.Certificates:GBT 19001-2008/ISO9001:2008/SGS

1.Professional design for PE granulator
2.High quality and competitive price
3.Heat-treatment:nitrided
4.Hardness:≥900Hv

1. PVC profile & pipe processing
2. 80/143 standard size
3. High quality wear-resistant steel

1.Apply for weber machine
2.Delivery time:35 days
3.Treatment:nitrided + bimetallic

haitian conical twin screw barrel
1.Optimum performance
2.45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, etc
3.Good service

1.Professional design for PVC
2.Material:38CrMoALA
3.Hardness:≥900Hv
4.High quality and competitive price

Nitrided & Bimetallic Log (Chuangji) Injection Molding Machine
Special design for various appliance like PET, PA, PC..

1.Apply for Krauss Maffei KMD machine
2.Delivery time:35 days
3.Treatment:nitrided + bimetallic

Conical twin screw and barrel
1,Ingredient:Cr,Ni,Wc,Fe,V
2,Alloy hardness:HRC56~HRC62
3,Diameter:15~350mm
4,Precise producing equipments

Extruder nitrided screw barrel
1. Factory direct
2. ISO 9001:2008 approved
3. High quality material, good production experience
4. Design screw

1. Original set for Toshiba Injection Machine
2. Unique design with barrier on the screw
3. Reliable quality in performance

1.Material:38CrMoALA
2.Heat-treatment:nitrided
3.Hardness:≥900Hv
4.Professional design for extruder

1.TOSHIBA screw barrel
2.Material:alloy steel
3.ISO 9001:2008 approved
4.Optimal design and Best material

1.Apply to Battenfeld Cincinati Weber KMD
2.Approved ISO 9001:2008
3.End products:WPC,proflie, pipe film etc.
4.Over 20 years in processing

Injection molding screw barrel for all kinds of injection molding machines, processing with common plastic such as PVC, PE, PP, PA, PMMA, ETC.

1.Material:38CrMoALA
2.Heat-treatment:nitrided
3.Hardness:≥900Hv
4.Professional design for extruder