screen printing wire mesh

Monel 400 Wire Mesh/Screen:Resists salt and fresh water at high temperatures. Good around most food; resistant to sea water and caustic solutions,etc.

Incoloy 925 wire mesh/screen: outstanding resistance to general corrosion, pitting, crevice corrosion, stress-corrosion cracking in many environments.

Nickel Chromium Mesh/Screen: Ni80Cr20:Good anti-corrosion, resisting to oxidation at high temperatures. High melting point of about 1400 °C (2552 °F)

Alloy 902 Mesh:nickel-iron-chromium alloy made precipitation hardenable by additions of aluminum & titanium.Mesh: 0.5-250mesh.

Monel K-500 Mesh/Screen:Excellent corrosion resistance of Monel 400 and greater strength and hardness. For Sour gas and Oil well industry instruments

Expanded Nickel Mesh/Screen is widely used in battery and chemical industries.Purity over 99.5%,Thickness:0.1mm~8.0mm. Has excellent heat resistance.

Copper Nickel 10 Alloy Wire Mesh/Screen: resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

Cu-Ni 5 Alloy Wire Mesh/Screen:Corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and salt solutions and organic acids

Nickel 233 mesh/screen is a commercially pure wrought nickel alloy combining good corrosion resistance with high electrical & thermal conductivities

Nickel 220 mesh/screen is similar to Nickel 205 mesh except with a chemical composition controlled for application as cathodes in electronic tubes.

Invar 36 wire mesh/screen:Alloy 36 wire mesh-nickel iron alloy wire mesh:has thermal expansion of one tenth that of carbon steel up to 400ºF(204ºC).

Alloy 42 wire mesh is alloy with high magnetic permeability; low expansion till 300°Cand it matches the expansion of soft glass .Mesh: 0.05-250mesh

Alloy 48 wire mesh/screen has expansion that matches soda-lead and soda-lime glass. Used as leads for electronic applications.Mesh: 0.5-250mesh.

Inconel 722 mesh/screen demonstrates a high level of resistance to various forms of corrosion and the capacity to remain effective at high temperature

Inconel 706 Wire Mesh has high mechanical strength and good fabricability, resistance to oxidation,corrosion and weld strain-age cracking.Mesh: 0.5-2

Wire is Acid- resisting & alkali-resisting.High strength & excellent resistance to various waters. Weave pattern:plain weave, twill weave, dutch weave

Nickel chromium alloy Ni20Cr35 Mesh: high resistivity, resistance to oxidation at high temperatures.Carrier or conveyor belt used in high temperature

Nickel chromium alloy Ni80Cr20 Mesh/Screen: anti-corrosion, melting point of about 1400 °C (2552 °F).Carrier or conveyor belt used in high temperature

Incoloy 800H/HT Mesh/ Screen:Good strength, excellent resistance to oxidation, carburization in high-temperature.superior creep and stress rupture.

Nickel-Copper 23 mesh/screen: Very malleable and good resistance to corrosion until temperatures of 400°C. CuNi23 Mesh:0.5-250 mesh.

Nickel Wire Mesh is weaved of nickel wire. The main characteristics is high temperature resisting (1000℃) acid resisting. It is a melting process.

Copper Nickel C706 has excellent resistance to corrosion. moderate strength and bio fouling in sea water.Mesh: 0.5-250mesh Thickness:0.05mm above

IIncoloy 801/802/803 Wire Mesh/ screen:good resistance to stress corrosion cracking,can be sensitized or made susceptible to intergranular attack.

Nichrome 70/30 Wire Mesh is used as conveyor belt or carriers in Industrial furnaces (up to 1230°C) with alternating oxidizing/reducing atmosphere.

15 Alloy Wire Mesh: the temperature coefficient of resistance is low.It can be used as general resistance wire mesh and core of low temperature heater

Nichrome 30/20 wire mesh/screen is used in numerous domestic appliances and industrial resistors.Good resistance to oxidation at high temperatures.

Nichrome 37/18 wire mesh:Used in conveyor belts for industrial furnaces. Sizes: 0.5-250mesh/inch Thickness: Min 0.05mm. Chromium is soluble in nickel.

Nichrome 60/15 wire mesh/screen: Used as carrier belt or conveyor in high temperature. heating devices operating up to 1000 ℃(1850F).

NiFe 60/40 wire mesh/screen is high nickel based welding wire for joining and rebuilding cast iron. Mesh: 0.5-250 mesh/Inch. Thickness: Min0.05mm

Multimet N-155 Wire mesh:Good Strength, Excellent high-temperature strength & good oxidation resistance up to 1800°F (980°C).Sizes: 0.5-250mesh/inch