sanitary solenoid valves

3V: 3 Way
4V: 5 Way
Pneumatic Control Valve
Air Valves.

China Kaiyuan Pneumatic Engineering Co.,Ltd. is domestic automatic components and parts manufacturers of industry with trade leading position to incre

2 inch 24v Steam water brass Solenoid valve
Media: Steam, hot water, air, oil (below 20cst)
Sealing material: PTFE
coil protection: IP54/IP65

normally open solenoid valve
1) three way series
2) orifice size:1.5mm
3) N/C and N/O series
4) direct acting series....

Media:Steam, Hot Water, Oil, etc.
Temp:20-200
Pressure:0.0 -0.4MPa
Material:Brass
Size: 1/2" 3/4" 1" 11/2" 2"...

1.Material: Brass, Stainless, Plastic
2. Port Size: M5 to 2"
3. pressure: 0-600Bar
4. Temperature: -600 to 600
5. Seal: NBR, VITON, EPDM, etc

Samsung SM321/SM411 solenoid valve VA01PEP34B-1U J6702048A
CP40LV / CP45FV-NEO / SM321 / SM320 / SM411) 8x2 / 8x4 / 12MM / 16MM / 24MM / 32MM / 44M

1.Material body: Brass;
2.100% tested
3. please contact factory for different voltage

natural gas brass solenoid valve DIRECT
2/2 way ,Normally closed ,
coal gas solenoid valves are suitable for firedamp ,coal gas and so on

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Media:Water, air, oil, natural gas, hot water etc
Temp:-10 ~180
Pressure:0~10 Bar
Material:PP
Size:G1/8 or NPT1/8 ...

18-Second Automatic Flushing Combined Solenoid Valve

Supporting higher working pressure 5.0Mpa and high temperature

OEM:24214974
Applicable Vehicle :Buick

Explosion solenoid valve
Media: Water, Air, Oil (below 20cst), Vacuum, solenoid valve

Castel Type Solenoid Valves is an automatic control parts used in refrigeration system, regular specification fors 1/4", 3/8", 1/2", 5/8" & 3/4" etc.

Medium: Water, Air,Oil\Gas
Temperature:-5 to 80 degree
Pressure: 0 to 0.7Mpa Max Pressure:1.05Mpa
Material: Stainless Steel
Model:2S160-15

2WB Fluid Solenoid valves with stainless steel body:
1.Good quality with low price
2.Hot product in the world
3.Good service and technical support

Direct acting normally closed solenoid poppet valves
mini solenoid valve
pp+fiber glass
CE ISO certification
High quality, competitive priceo

1. ISO 4401 Standard pattern subplates
2. Four main ports with NBR or FPM seals for different working position
3. With or without indicator lamp

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

CAT SOLENOID CONTROL VALVE For CATERPILLAR C7 HEUI
Mail: eric(at) china-lutong(dot)net
Whatsapp/Viber/imo: + 86 135 0594 6325 Skype: CRV783

It is a two-position five way single type solenoid valve, with port size of G1/8 inch and main material aluminum alloy. We offer high quality products

1.CE certification solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

pneumatic cylinder, air cylinder, pneumatic component
Material:Plastic Steel
Model:EGF-06
Type:Normal Close
Pressure:Medium pressure

Medium: Water, Liquid
Temperature:-5 to 80 degree
Pressure: 0 to 10 Bar
Material: PA
Seal: NBR ...

SOLENOID VALVE magnetic valve ,high pressure solenoid valve
1)HIGH PRESSURE,
2)NASS COIL, from Germany
3)STAINLESS STEEL BODY,
HIGH QUALITY

pneumatic cylinder, air cylinder, pneumatic component
1. C011 US push in fittings
2. CE ISO certification
3. M5 to 1" thread
4. NPT, PT, PP threa

Orifice: 2 mm
Plug NBR.Viton .Silicon, PTFE
Pressure range: 0-2.0Mpa