sandwich panel machine

Material Thickness: 0.6~1.2mm
Forming Steps: 12
Main Power: 5.5KW
Cutting method: Hydraulic Cutting
Control System: PLC automatic control system1.

Main Components
1. Main machine
2. Manual/hydraulic decoiler (7 tons)
3. Manual pre-cutting
4. Hydraulic system...

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

It is a compound automatic production line specially used for plates cementing (spraying), which is autonomously researched and developed by Dalian Hu

Gzcleanroom.com machine rock wool panel has a low thermal conductivity and excellent insulating effect. It is usually applied to the fireproof buildin

This producing line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate.

Welded mesh panel welding machines have types: heavy welded mesh panel welding machine, spot welding machine and auto control fencing welded machines

Door Panel Forming Machine
Leading company for more than ten years
Pass ISO9001&CE
Reasonable price
Best after-service

This machine called 3D machine,3D machinery, 3D panel machine, 3D board machine .
Slanting Bar Spot Welding Machine
High automatina,the annual outpu

It is used in producing casting PU elastomer, such as printing roller, screen plate, impeller, universal castor, lifting weight, hydraulic seal ring,

This is a cleanroom full service construction under GMP request. It could be customized. Turnkey project.
Modular design, easy install and mainten

Ceiling panel making machines is widely used inmaking
aluminium or galvanized steelceiling panel,etc with size
of 600x600

Can margin trim, slittering and cross cut.

 
 LCD HMI
 <b

1, 400mm WPC wall panel making machine
2, board size: MAX 400*80mm
3, output: 350KG
4, installation power: 83KW
5, SIEMENS motor

This machine applies two charging ways,automatic pneumatic feeding or fan suction device feeding.Air cooling is at a low cost,energy saving

1, stable running less maintance
2, high output 150KG/H
3, wide and thickness precision
4, raw mterial 1:1.5 formula
5, low power

 
 
3 Layer Plati

 
 
3 Layer Plati

 
 
Foamed Plasti

 
 
Foamed Plasti

This roof panel forming machine is suitable for manufacturing colored steel roof panel. Its normal material thickness is roll coating with 0.3-0.8mm.

it has been tested for many times, so it has the advantages of saving energy and material, and increasing efficiency and profit by adopting advanced

HT colored steel panel arching machine.
Our machine have nice appearance,good quality and perfect after-sales service.

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building

1.Material thickness:0.3-0.6mm
2.Working speed:Approx 14m/min
3.Suit color or galvanized steel sheet
4.Widely used in roof or wall building