roller garage doors

5#Hinge
GDP1005
DEC:5#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC: Industrial Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.

‧11 GAUGE HINGE # 1 ~ # 12
‧BRIGHT ZINC PLATED 11 GAUGE STELL HINGE LEAVES
‧FULL BODY 3" WIDE ‧FOR USE WITH 7/16" DIAMETER STEM ROLLERS

DEC:Small Size Pusher Spring
The is Provided with 2 Inch rubber stop for use small door pusher
Thickness:2.5mm
Finish:zinc plate

PUSHER SPRINGS 27"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 27".15" COMPRESSION

2"black nylon rollers
4" zinc plated stem
rating 50 lb lading at 100000 8" door cycles

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

Track Bottom Bracket
DEC: Track Bottom Bracket,The bracket is suitable for inside cable fixing for 2 "tracks
The advised max door weight is 100kgs

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

164 Hi lift cable drum
164 HI-LIFT
Max. Hi-lift: 164"
Capacity: 1000 lbs per drum
Max.cable size: 1/4"

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5mm
Finish

Description: Side Brackets
The bracket is provided with slotted holes and suitable for the fixing of tracks
Thickness:2.5mm
Finish:zinc plate

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2 5/8spring fitting
Finish:zinc plated

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.

DEC:Plastic Bearing
The interior diameter is 25.4mm

3-3/4' spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

1-3/4" Spring fittings
Max.wire size:0.295" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screws

2#Hinge
GDP1004
DEC:2#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Chain hoist for the garage door parts
Chain hoist including the metal case, gears and the chain,
the reduction of the gears including 6.6:1, 3:1

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

DEC:U HOOK
GARAGE DOOR INSTALL PARTS
Finish: Zinc plate

Spring Fitting
zinc plated

18 GAUGE HINGE # 4
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Product Code：GDP5027
BRIGHT CHROME PLATED

2" 10 BALL STEEL ROLLER WITH ZINC PLATED STEMS
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER

2" 10 BALL STEEL ROLLER WITH ZINC PLATED STEMS
7" STEM ( WORKING LENGTH = 6 1/4" )

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR