residential garage doors

DEC: Industrial Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.

‧11 GAUGE HINGE # 1 ~ # 12
‧BRIGHT ZINC PLATED 11 GAUGE STELL HINGE LEAVES
‧FULL BODY 3" WIDE ‧FOR USE WITH 7/16" DIAMETER STEM ROLLERS

PUSHER SPRINGS 27"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 27".15" COMPRESSION

2"black nylon rollers
4" zinc plated stem
rating 50 lb lading at 100000 8" door cycles

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2 5/8spring fitting
Finish:zinc plated

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.

3-3/4' spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

2#Hinge
GDP1004
DEC:2#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

3" 10 BALL STEEL ROLLER
9" STEM ( WORKING LENGTH = 8 1/2" )
BULGED SHOULDER

Chain hoist for the garage door parts
Chain hoist including the metal case, gears and the chain,
the reduction of the gears including 6.6:1, 3:1

DEC:U HOOK
GARAGE DOOR INSTALL PARTS
Finish: Zinc plate

Spring Fitting
zinc plated

Product Code：GDP5027
BRIGHT CHROME PLATED

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

DEAD BOLT DIECAST CASE
100 KEY CODES AVAILABLE
POWDER COATED ZINC CASE
COMPLETE WITH REQUIRED MOUNTING HARDWARE
QUALITY 5 PIN TUMBLE

DEC:Residential Inside Slide Latch
Include cases,bar,spring and screws
Case:2mm steel. Bar:4mm steel
The center line of the fixing holes is 8

Residential Top brackets
For use with double track door and suitable for 11mm shaft
Thickness:2.5mm
Finish:zinc plate

USE ON NON INSULATED DOOR PANELS
3" INSIDE DIAMETER
INCLUDES FASTENER & GASKETS

DEC:Left & Right Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Suitable for residential

Double Track Top Bracket
DEC :Double Track Top Bracket
For use with double track door and suitable for 11mm shaft
Thickness:3mm
Finish: zinc plate

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

3-3/4' " spring fittings sliding thread
Max. wire size: 0.406" diameter
set includes 1 winding and 1 stationary
color coded winding fittings

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

‧END STILE LATCH SPRING ACTUATED INSIDE LOCK 
   ASSEMBLY
‧7 1/2" LOCK BAR WITH 2 1/8" THROW
‧BRIGHT ZINC PLATED STEEL

2" 07 BALL STEEL ROLLER WITH ZINC PLATED STEMS
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER
HARDENED RACES

2" NYLON ROLLER
4" ZINC PLATED STEM WORKING LENGTH = 3 5/8"
BULGED SHOULDER
RATING :50-LB LOAD @ 10,000-8' DOOR CYCLES

GDP1016
DEC: Center Hinge
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated

GDP1018
DEC: Height Finger Protection Central Hinges
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated