reader module

Connecting one antenna outside or inside;ISO 18000-6B & 6C; different Programming languadge

1. Read distance>1000mm, Write distance>100mm;
2. UHF RFID Reader Module
3. Customized supported

HYM360 UHF RFID reader uses PR9200 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function.

Connecting two antenna outside or inside; ISO 18000-6B &18000-6C; different Programming languadge

LF 125KHz & 134.2KHz dual-frequency, compatible with ISO11784/11785 standard, Read UID only EM4100/4200, Read/Write Hitags 64/256/2048 cards/tags,etc

CR0301A is a 13.56MHz Mifare and ISO14443 A Cards Reader ,support  Mifare 1K , Mifare 4K , Mifare Utralight SLE66R01P FM1108 working at 3v ,

CR003 is an Small size 125Khz read only Module for EM4200 TK4100 4100D ,what can choose 3v 5v version, and differents size coil matched. UART or

PCD: NXP RC531,RC632,RC500,RC400
Working frequency:13.56 MHz
RF standard: ISO14443A, ISO14443B, ISO15693
SAM card slot: 2
Interface: USB or RS232

HYM750 UHF RFID reader uses R2000 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function.

YST307 is based on NXP RC500, RC400, RC531, RC632 chip design, it supports USB or RS232 interface and fully compatible with ISO14443A, ISO14443B, ISO1

YST302 is based on NXP OM9663 chip design, it supports USB(HID) or UART interface and fully compatible with ISO14443A, ISO14443B,ISO15693. It is very

JMY608, based on NXP SL RC400, is the reader module.

PCD: NXP CV520
Working frequency:13.56 MHz
RF standard: ISO14443A, mifare
Interface: IIC or UART

 
 
Mifare 4k / Nfc TYPE A Rea

Mifare readable and writer module, compliant with ISO14443A standards, to R/W Mifare1 S50,Mifare1 S70, Mifare Light, Mifare UltraLight, Mifare Pro,etc

compliant with ISO14443A standards, which can operate Mifare1K,4k, Mifare Ultralight data to be read and written, and read only UID of all other cards

PCD: NXP RC531
Working frequency:13.56 MHz
RF standard: ISO14443A, ISO14443B, ISO7816
SAM card slot: 2
Interface: USB or RS232

 CR0381A is  reader/writer based on 13.56 MHz, it supports Mifare and ISO 14443 A Cards type like Mifare 1K , Mifare 4K , Mifare Utrali

embedded Contactless & Contact R/W module, which special designed for contactless CPU cards application used, 4 PSAM card slot,compliant with ISO7816

Support ISO14443A, ISO14443B,ISO7816. the module built in antenna. Excellent quality and use widely in desktop and handheld reader. Competitive price.

Impinj R500 Chip, 200tags/s
The reading distance is 12 meters connected to 7dBi antenna.

JMY608 is the module version of MR760R&W. JMY608 is the module with USB interface (HID standard).

If you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

HYM750 UHF RFID reader uses R2000 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function.

Support ISO14443A,ISO14443B,ISO15693. Inlay antenna. Only UART port.Excellent quality and use widely in desktop and handheld reader.

1. Mutil-protocal support: 6B&6C
2. Small in size and can be embeded to other products

magnetic card reader module
low comsumption
ISO7811/7812
TTL output
43/90mm

Working frequency: 125KHz
Reading Range: up to 5-11 cm
Audio / light indication: signal lamps

It is designed upon dedicated RFID Engine ASIC with fully self-intellectual property.

Reading Range: up to 5-11 cm
Working frequency: 13.56MHz
Operating Temperature: -30℃ to +40℃