quartz glass

Single Tube Infrared Heater Lamps
1. quartz tube diameter : 10mm/12mm
2. length: 241mm
3.120v 500w
4.reaction time : 1 second

Energy saving

Fast heating

Shorter heating area

Low investment cost

Easy installation...

1.filament material used for electrical infrared heaters is tungsten wire
2.quartz glass because it has a hotter melting point than standard glass.

1. Instant heat : More than 90% emission within 2 mins
2. Clean: No byproduct, no Pullution
3. Safe : Quartz envelope, heat shock resistance

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: 850-950℃
4. Filament Material: Tungsten

1.Heat is applied precisely where and only for required
2.infrared radiation requires neither contact nor intermediate transfer medium
3.clean

1.Heat is applied precisely where and only for required
2.infrared radiation requires neither contact nor intermediate transfer medium
3.clean

1.Heat is applied precisely where and only for required
2.infrared radiation requires neither contact nor intermediate transfer medium
3.clean

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: Temp of heating element: 1800-2400℃
4. Filament Material: Tungsten

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: 850-950℃
4. Filament Material: Tungsten

Type: Shortwave infrared heating lamps
Quartz tube diameter: 10/11/12/13mm
Length: 100mm - 2200mm
Voltage: 80V - 600V
Cable length: 100-2500mm

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: Temp of heating element: 1800-2400℃
4. Filament Material: Tungsten

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

Transparent quartz glass infrared lamps
1.Model No:SWIR10370x,10mm diameter
2.370mmOVL280mmHL,235V/1000W
3.Application:Glass Autoclave oven

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: 850-950℃
4.Multiple coatings available: Gold, Ceramic and Ruby

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

Quartz glass infrared heating tube
1.Can be run with on-off switch frequently;
2.Satisfy the heating requirement of glass heating or fast drying.

Quartz glass tube infrared lamp
1.Medium wavelength: 2.6 -4.2um;
2.The max range in the group of infrared radiation;

1. Instant heat : More than 90% emission within 2 mins
2. Clean: No byproduct, no Pullution
3. Safe : Quartz envelope, heat shock resistance

Medium wave quartz heater for glass tempering
1.Cross section: 33*15mm
2.Coating:Golden/Ceramic White
3.Function: for glass laminating

1. Instant heat : More than 90% emission within 2 mins
2. Clean: No byproduct, no Pullution
3.heating material : alloy wire
4.warranty time:20000Hs

1. heating filament: Ni-Cr or Fe-Cr-A1 resistance wire
2. IR wavelength between 2-4 um
3.Operating temperature 900° C
4.Response time around 1 min

1. 850mm overalll length,700mm active length, 3200W/400V
2. Single tube golden infrared heaters comparison
3. Printing Tunnel drying system

1. 370mm overalll length, 280mm active length, 100W/235V
2. High quality quartz glass tube IR lamps
3. Short response infrared drying

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: 850-950℃
4.Multiple coatings available: Gold, Ceramic and Ruby

Single Tube Infrared Heater Lamps
1. quartz tube diameter : 10mm/12mm
2. OAL: 270mm HL=220mm
3. 220v 1000w
4.reaction time : 1 second

1. Application: Glass laminated line quartz emitter
2. Twin tube size: 33mm width, 15mm height
3. Power/Voltage: 7250W/380V
4. Length:3080mm