pump mechanical seal

Multi-Spring Mechanical Seal (TSC59U)
A robust bellow seal, with a wide non-DIN cross section, for optimum flexibility and durability

Rubber Parts custom according to your drawing
O-RING:NBP/VIT/ERP/PTFE
need pay mould charge

Single Seal
● Unbalanced
● Independent of Direction of Rotation
● Elastomer Bellows

Applied for household pumps, water pumps and submerisble pumps.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20 to 100 degree celsius

Johncrane680 metal bellow mechanical seal
for general-purpose applications
a standard for low-temperature applications

single cartrige mechanical seals
Einsatzparameter : 25mm -100 mm ;
Druck :-25 bar;
Temp: o-ringbegrenzung
Geschw:25m/sek max

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta. CONICAL SPRING SEAL TYPES

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

replace the mechanical seal John Crane 1A
Applications:Clean Water,Sewage Water,Oil and other moderately corrosive fluids.

CR560S double mechanical seal
Temperature:-20℃-100℃
pressure:<0.5Mpa
speed:<8m/sec

Robust and easy to install design
Springs protected from the product
No metal parts on the product side
Simple conversion of gland packings

Operational Conditions:
Temperature:-30℃ to +210℃
Pressure: ≤1.2MPa
Speed: ≤18m/s

1.Mechanical seal type 120 is often used in chemical pumps, sewage pumps and submerged pumps.
2.inclusion seal

Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20 to 150 degree celsius
Medium: water, oil and weakly-corrosive mediums, etc.

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

Transportation:by air or boat;DeliveryDate: 15-20days;PaymentType:TT or others;Trademark:TLS;ExpRegion:Europe USA and East Asia;

Mechanical Seal TD5-40 43 48 55mm CNP Nanfang Pump Mechanical Seal

Pressure:≤2.5MPa
Secondary Seal:Nitrile(NBR),Ethylene Propylene(EPDM),Fluorocarbon Rubber(Viton)

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

Stationary Ring: ceramic
Rotary Ring: carbon
Secondary Seal: NBR
Pressure: within 0.8Mpa
Temperature:-20 to 150 degree celsius

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

,ISO9001-2008 Certificate passed
,Single spring seal
, Rubber bellow seal

wave spring seal CRMTN
Equal:burgmann type M7N
Temprature:-20℃to +190℃
Pressure:<1.2Mpa
Speed:<15m/s

Productivity:10000;Transportation:by air or boat;PaymentType:TT or others;Trademark:TLS;ExpRegion:Europe USA and East Asia;

Mechanical seals for Gorman-Rupp Pumps.double-floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and rotating face .

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

mechanical seal
If you are used to use the die casting and mechanical seal, our goods must be meet your requirements.

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

used in diving pumps, household pumps and blower pumps
Pressure: within 1 Mpa
Speed: within 15 m/s

O-ring Mechanical Seal CR82
temperature:-20℃ to +180℃
Pressure:<<1.2mpa
Speed:<<15m/s