ptfe

The products are widely applied in the conduct roll for resistance of high temperature,acid,alkali and non-stain of the surface,protecting with the

PTFE septa pre-assembly open-topped cap and PTFE Silicone septa
High Quality Control with competitive Prices

The products are widely applied in the conduct roll for resistance of high temperature,acid,alkali and non-stain of the surface,protecting with the lo

Place of Origin: Zhejiang China (Mainland)
Brand Name: ERM
Material: PTFE/Silicon
Standard or Nonstandard:Standard

1.Temperature resistance:it can continuously work under -70~230 degree.
Weatherability:resistance to ozone,oxygen,sunlight and aging,long using lif

PTFE automatic molded machine
suit for produce PTFE gasket, PTFE seal , ball valve seat and other PTFE parts
material : PTFE powder

Non-metallic compensator:used as pipeline flexible coupling,non-metallic compensator helps to avoid damage caused by heat expansion and cold contracti

COLOUR:natural/white/blue/red
Met:PTFE/Silicon,Teflon/Silicon

1) it is good for heat resistance ,about 280degree
2)non sticky ,be somoth on both side
3)width:125cm ,we can cut it to the pieces ,the size

PTFE/ silicone septum for 2ml, 4ml, 10ml HPLC vials.
color is red, blue, white ,natural etc.

This tape can be well used in the temperature range of -60℃~+260℃ protecting with the low friction of heating up flat

1,size: 8mm, 9mm, 11mm, 20mm etc
2,Color: natural,red ,blue.white etc
3,Property: No need to wash, ready to use,
4,Material: PTFE and Silicon

Excellent non-sticky property--It easier to remove those resins,dopes,oil and other sticky things.

PTFE/Silicone septa are used for headspace crimp vials.Pre-assembled caps and septa reduce the chance of containation.

1.Heat resistance property
It's able to work stably between -60degree to 260degree

1,size: 8mm, 9mm, 11mm, 20mm etc
2,Color: Belge, white
3,Property: No need to wash, ready to use,
4,Material: PTFE and Silicon

This belt is made of high tensile fiberglass or kevlar,knitted by special equipment and coated with fine PTFE.Seamless belt overcomes former problems

Place of Origin: Zhejiang China (Mainland)
Brand Name: ERM
Material: PTFE/Silicon
Standard or Nonstandard:Standard

Permeability-it can avoid wasting heat and improve drying efficiency for it's permeability.

Place of Origin: Zhejiang China (Mainland)
Brand Name: ERM
Material: PTFE/Silicon
Standard or Nonstandard:Standard

Non stick-it can easily remove all kinds of adhesives such as resin,paint and chemical medicine,easy to clean.

PTFE automatic molded machine
suit for produce PTFE gasket, PTFE seal , ball valve seat and other PTFE parts
material : PTFE powder

1.Heat resistance property--It is able to work stably between -60~260 ℃.
2.Excellent non-sticky property--It easier to remove those resins,dopes,

PTFE Coated Fiberglass Fabric Silicone Adhesive Tape is well known as its smooth surface, non stick, chemical resistance and high temperature resista

PTFE/Silicone septa are used for headspace crimp vials.Pre-assembled caps and septa reduce the chance of containation.

Color:brown ,black and white
Thickness:0.08mm, 0.13mm, 018mm,0.25mm
Width: largest 1.27m, can cut according to the customers requirement

PTFE/Silicone septa are used for headspace crimp vials.Pre-assembled caps and septa reduce the chance of containation.

It can be used conveniently,long-lived and have good insolation.This tape can be well used in the temperature range of -60℃~+260℃.

it is good heat resistant ,-140 to 260 degree
we can cut it from 5 mm to 125mm or as your requirements

Excellent non-sticky property--It easier to remove those resins,dopes,oil and other sticky things.
Excellent insulation property.