ptfe mechanical seals

Temperature:-20℃ to +180℃
replace the mechanical seal of John Crane 8B1T

 
Our products can replace the mechanical seals produced by Burgmann and John Crane and be widely used in petroleum, chemistry, refi

Applied for water pumps, submersible pumps and blower pumps, etc.
Pressure: within 1Mpa
Speed: within 15m/s
Temperature: -30 to 200 degree celsius

Pressure: within 0.6Mpa
Speed: within 10m/s
Temperature: -20 to 200 degree celsius
Medium: water, oil and weakly-corrosive mediums, etc.

Secondary Seal: NBR/EPDM/VITON
Spring&Metal parts: steel
Stationary Ring: ceramic/SIC/TC
Rotary Ring: carbon/SIC/TC
Applied for submersible pumps

Applied for blower pumps, diving pumps and circulating pumps, etc
Pressure: within 0.8Mpa
Speed: within 5m/s
Temperature: -30 to 200 degree celsius

ISP C2100 elastomer bllow mechanical seal
the same as the original item;

Secondary Seal:NBR,EPDM,Viton,PTFE
Standard:TBG9
Alternative:TBG92

Applied for clean pumps, water pumps and submersible pumps, etc.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20℃~100℃

o-ring used for mechanical seal
mainly uses American Standard
material : VIT,NBR,EPR,PTFE
Colour :black ,brown, green

.High load supporting capacity
.low friction characteristic
.Good dust-proof capability

CR980 equivalent to VULCAN TYPE98.
O-ring mounted, unbalanced, parallel spring seals,
O-ring mounted stationary seat and grub screwed drive collar.

we can make mechanical seals equal to GF pump seals.
Type: CR1,CR2,CR3,CR4
Material:SIC,TC,Carbon,Viton rubber,SS304, SS316

Burgmann AK5M wave spring mechanical seal
temperature:-20℃~+180℃
pressure:≤1.2Mpa
speed:≤15m/s

Trademark:dyseals;Certificate:ISO9001-2000,TS16949;

Single spring mechanical seal type CR560A
temperature:-20℃ to +120℃
Pressure:<<1.0Mpa
Speed:<<15m/s
media:clean water, sewage water, Oil and oth

Premium-grade carbon and silicon carbide are standard.
Robust pin drive gives positive torque transmission.
Hydraulically balanced for optimal

1.Pressure: up to 1Mpa
2.Speed: 13m/s
3.Temperature: -30 to 200 degrees celsius

Single Spring Seal/Parellel Spring Seal
Equivalence to John Crane Type1

Sintered in HIP Furnace
ISO9001:2000 Certificate
Material in Fine Grain Size

We could design and manufacture pump seals as your requirement.Of course,we promise our price is very competitive and the quality is high

Cartex-S  SIZE(25mm-100mm) for all kinds of pumps/Cartridge Mechanical Seal
<

Multi-Spring CR40 Mechanical Seal
equal:Valcan type 40
temperature:-20℃to +180℃
Pressure:<<2.5mpa
Speed:<<15m/s

Stationary Ring:Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide,Ceramic(Alumina),Silicon Carbide Reaction Bonded

Stationary Ring:Ceramic (Alumina),Silicon Carbide Reaction Bonded, Silicon Carbide Sintered Pressureless, Ni-binder Tungsten Carbide

this Mechanical Seals to suit AlaLava LKR & APV RCN machines. Replace AES BHCH seal, AES BHCH SEALS.Mechanical Seals to suit Ala Lava LKR & APV

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

Single-Spring mechanical Seals CR960
acts as a seal
suit for the pumps

Grundfos CRGLF-3 is a single spring O-ring seal,mounted semi-cartridge seals with PUSH-FIT head , suit for grundfos pumps

Wave Spring Seals - John Crane 80
temperature:-40℃ to +200℃
Pressure:<<0.8 Mpa
Speed:<<18m/s