ptfe mechanical seals

single spring mechanical seal
Pressure: ≤0.8Mpa
Speed: ≤10m/s
Temperature: -20℃~150℃

OPERATING LIMITS:
1.Pressure: 1Mpa
2.Speed: 10m/s
3.Temperature: -30℃~200℃

1.materials:ca/ce/nbr/steel,etc
2.size:3/8" to 1"
3.made in china
4.professional manufacturer

E.M.U Pumps Seals CREMLL
equal to AES-SOEC SEALS used for EMU pumps and Mixers
temperature:-40℃ to +200℃
Pressure:<<1.2mpa
Speed:<<20m/s

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

The Type 96 drives from the shaft, via the drive collar with grub screws, inserted in the spring coil tail.
Available as standard

this seals suit for LFA LAVA PUMPS
All 35mm & 42mm LKH seals, models 5 thru . lava pump mechanical seal for alfa laval pump and Fristam pump

AS-21 seal similar with the Johncrane type 1A ,type 21,type 2 seal and Vazel Line AM seal .

Excavator EX200 Bucket Cylinder Seal Kit
100% new and made by SQT
Warranty 3 months
High quality with best price
China seal factory direct sale

Seals suit for ALA LAVA MR166A PUMPS. Rotating part with carbon face.
Designed to meet the hygienic requirements of the dairy, food and beverage

Mechanical Seals For Sanitary Pumps CR208/12
insert B/Q22/U22
outboard rotary no base plate
relevent products:208 types,208/01,208/1,208/2,208/11B

Replacement to:
John Crane 21 seal
Aesseal P04/P04T seal
Flowserve 110 seal
Roten 21Aseal ...

Replacement to:
Burgmann MG1S20 seal
Aesseal BP02 seal
John crane Crane 2 seal
Flowserve 150 seal ...

replace original grunfos spare seal, single spring o-ring.used ofr CM3 HORIZONTAL TYPE PUMPS .Mechanical Seal Horizontal Type For Shaft Size 12Mm

Book mounted seats to suit a veriety of different housings and working length standards ring. Inch size. enquivolent to sterling 152 seal.

Seal type: CR-F-22
Shaft size: 22MM
Rotary material: Tungsten carbon
Stationary seat: Stainless Steel
O-rings: EPDM or Viton

Seal face: Silicon carbide (Q12), Carbon (A)
Secondary seals:
FKM (V), EPDM (E), FFKM (K)
Metal parts: CrNiMo steel (G),
Grade 5A (4T), SMO 654 (

Mechanical seals for all range of Hidrostal pumps to machined mechanical seal and is widely used for all kinds of pumps. HIDROSTAL PUMP REPLACEM

Main Characteristics
Mostly Use: oil, water and other
low corrosion mediums.

Operating Conditions:
Temperature: -40℃~200℃
Pressure: ≤2.5Mpa
Speed: ≤20m/s

Replacemnt to:
mechanical seal for sanitary pump
Replacemnt to:
Aesseal P09 seal
Vulcan 94 seal ...

we can send doof qulity and best price for you. you can contact me any time.

O-ring mounted seats
Meeting DIN24960 standard
G6 (Materials): Ceramic (Alumina), Silicon Carbide, Co-binder Tungsten Carbide, Ni-binder Tungsten

SEDICAL PUMP MECHANICAL SEAL INDUSTRIAL PUMP
SD-A-12
SD-A-18
SD-A-25
SD-A-32

TBEMLL Mechanical Seals,Aesseal SOEC seal

Applied for blower pumps, diving pumps and circulating pumps, etc
Pressure: within 0.8Mpa
Speed: within 5m/s
Temperature: -30 to 200 degree celsius

Applied for water pumps, submersible pumps and blower pumps, etc.
Pressure: within 1Mpa
Speed: within 15m/s
Temperature: -30 to 200 degree celsius

Mechanical seals re abvailable to suit Fristam® pumps, seat and collet arrangements are commonly used in the dairy and whey industries.

Seal face: Carbon graphite, FDA conform
Seat: Silicon carbide
Secondary seals and metal parts according to application and customer's specifications

1. Stationary Ring:ceramic/SIC/TC
2. Rotary Ring:carbon/SIC/TC
3. Secondary Seal:NBR/EPDM/VITON
4. Spring&Metal Parts:SUS304/SUS316