power cable wire

It is specially used for adjustment of sagging of conductors, to hold the conductors temporarily during the stringing operation.

Adopts self driving way, which is mostly applied in stringing works. Suitable for pulling, assembling and tensioning of overhead conductor and OPGW.

Serves to turn the steel wire rope when used for tension stringing, can pass through the wire rope connector. Speeds for hauling the rope is 80m/min.

The stringing blocks are used for overhead transmission line conductor stringing operation. It can be hanged or installed on cross arms.

The Tandem sheaves stringing blocks are used for stringing conductors in the condition of big angle or corner on transmission line.

5 /10KN triple bundle stringing block and pull board ,applied to one pull three bundle smallbore conductor in line construction.

 Multi Conductor control

80~200mm tube diameter C series cable entrance protection roller pulley block,three roller the curvature radius is 450mm, lockable ,nylon roller.

10KN tri-roller assembly corner ground roller pulley block,
They can be built up arbitrary turning angle on requirements.
model N is nylon roller

Used as pilot wire rope for pulling conductors, earth wire or OPGW cables in stringing operation with high strength galvanized steel wire.

Reel stands is used to raise and support conductor reels in conductor stringing operations. The reel could be controlled by side disc brake.

The triple sheaves stringing rollers are used for stringing small conductors on transmission line. It can be installed on cross arms of tower or pole

suitable cable diameter less than 50mm conductor cable length measuring meter ,
to measure the spreading length of conductor or cable.

this hydraulic steel wire cutter weighs 14kg. Its item number is 16275. Our product serves to cut off the steel wire rope with its diameter of 30mm

For individual conductor sizes to ensure maximum contact around the conductor circumference. When ordering specify conductor diameter and name.

It is specially used for adjustment of sagging of conductors, to hold the conductors temporarily during the stringing operation.

The double sheaves Hoisting Tackle Blocks have two openings on both sides of sheaves, for easily installation of steel wire rope.

R450 /R700mm curvature radius multi-roller pithead cable protection roller pulley block,Maximum cable diameter 100 /160mm,Block number 3/6

1040MM stringing blocks are used for stringing super size conductor (38-45 mm) in 800KV or 1000 KV overhead transmission line construction.

This large diameter stringing conductor pulley block has the maximum suitable conductor LGJ720 for overhead power transmission lines construction.

Fixed with wire mesh cable trays straight sections.

 
Underground Electric W

926MM stringing blocks are used for stringing big size conductor (35-38 mm) in overhead transmission line construction.

2.7 /3kg weight outer layer of conductor stripper ,
Applicable conductor LGJ240~400 /LGJ500~720

10~20KN coir rope aluminous hoisting tackle pulley.Monosheave open hook,Twin -sheave hook ,Tri -sheave ring.

The running grounds is used to eliminate induced voltage on conductors or ground wires in line stringing operation.

Our conductor or cable length measuring meter comes with the item number of 22121 for conductor and 22131 for cable.

 
Medium voltage XLPE in

 
DC P

 
Copper Conductor XLPE Power Cabl