polished stainless pipe

Type 304-the most common grade;the classic 18/8(18% chromium, 8% nickel) stainless steel. Outside of the US it is commonly known as A2 stainless steel

FEATURES
Uniformity of OD, ID and Wall Thickness
Uniform Strength and Ductility
Easily Welded, Brazed or Bonded
High Strength to Weight Ratio

All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill.

- Higher creep resistance
- Excellent formability.
- Rupture and tensile strength at high temperatures
- Corrosion and pitting resistance

Test :
1 . X-ray , Size test , Length test
2 . Chemical Analysis ( Photoelectric Emission Spectroscopic ) etc

China Welded Pipe Manufacturer GANYEAH GROUP supplies ASME B36.19 ASTM A312 TP304 Welded Pipe, DN40, SCH40S, Length 6M.

scope of application: Oil, sea oil, chemical, pharmaceutical machinery, aerospace, nuclear power, shipbuilding, high-pressure boiler, heat exchanger,

Packing: plywood boxes or plastic bundles
Shipment: By sea with FCL/LCL contianer or in bulk ;by airfreight,
Standard: ASTM A312

1. 100%PMI the mother pipe to ensure we put right material.
2. 100%PMI the finished pipe again to ensure we produced right grade

Large diameter (up to 100″) / heavy wall welded pipes (up to 60mm)
Unit length up to 12 mtrs with no circular joints
Pipes produced by plate

Size:1/8″NB TO 30″NB IN
EFW 304 Pipes & Tubes:6″ NB-100″ NB
ERW 304 Pipes & Tubes:1/2″ NB -24″ NB
304 Pipes & Tubes:1/2″ NB -16″ NB

Stainless steel mechanical tubing in a wide range of grades and sizes. Ganyeah's program of mechanical tubing includes several grades of austenitic

Excellent ductility and impact strength at both ambient and sub-zero temperatures.
Specified for pressure vessel applications.

High resistance to abrasion, erosion and cavitation erosion
Excellent resistance to stress corrosion cracking in chloride containing environments

Type: Welded Pipe
Size: 8 Inch (DN200)
Wall Thickness: Sch80
Length: 6 meters
Ends: Beveled Ends...

Stainless steel is frequently specified for food production, pharmaceutical, chemical and industrial applications due to its corrosion resistance

310S stainless seamless steel pipe
1)Thickness:1.5-10mm
2)OD:38-410mm
3)Application:Structure
4)Certification:ISO9001:2000

1. Size: 6-630m
2. Standard:ASME,JISB,DIN etc.
3. Wall Thickness:SCH5S-SCH160
4. PED,AD, ISO9

Application: Turbine blade
Special Use: Valve Steels

All AISI 300 series stainless steel
Available in heavy-duty type and light type
Used for connecting iron pipes
Size:
DN 50...

[Grade]ASTM A312
[Material]TP316L.
[Type]Welded stainless steel pipe.
[WT]SCH 40S.
[Size]10". ...

Our welded, welded and drawn tubes size range goes up to 38.1mm (1 1/2") OD. We can manufacture welded straight lengths up to 20m (65.6ft) .

Heilights:
Pipes up to 24" made in continuous production from coil
Pipes up to 80" made from single plates
Maximum thickness 40 mm

In solid strength reach SDS 304 of the melted State. 0 times times more in JIS g 4,305 mechanical properties of melt - solid state requirements, yiel

seamless welded lsteel pipe
line pipe for conveying gas, water, and oil
API 5L Certificate
Petroleum industry
large amount of stock

High pressure stainless steel pipe
Material: stainless steel #304
Outer Diameter: 16 / 18 / 25.6 mm
Wall thickness 0.25mm
Length 20m~50m...

201 stainless steel pipe
1.Thickness:1.5-15mm
2.OD:6-280mm
3.BV certificate
4.Application: chemical industry

Austenitic stainless steel for corrosion resistance of stainless steel is to overcome the horse's shortcomings and developed of too brittle.

Single phase of cold deformation of austenitic stainless steel with good performance, can be drawn into very thin wire, cold - rolled into very thin

Precipitates as the primary ferrite AISI 316l, adding only a slight increase in copper the critical solidification temperature range (about lOK), whi