pneumatic

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

Standard: EN10305-4
Application: For hydraulic and pneumatic power systems
Size(mm): O. D.: 6.0~85 W. T.: 0.5-20 L: Max 12000

100mm distance pneumatic clamping claw for 25mm air cylinder caliber , made by alu. body and steel piston rod , the highest acting rate: 80 and 100

DT type exhaust muffler (silencers): ,brass type
Material: Sintered SS316, sintered cooper, etc
Size: M5 to 2" Special sizes also ok
Thread: NPT,

pneumatic membrane lining PTFE valve, ZJHPF pneumatic PTFE membrane lining a single seat control valve is a kind of anti corrosion through single seat

Rated stroke deviation of KHPM type electric pressure regulating valve, a straight stroke electric actuator and low flow resistance .

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

pneumatic actuator ,conform to lastest standard:ISO5211,DIN3337,VD/VDE3845 and Namur . Size: DN32 ~DN400, Type:double acting or single acting

1.BH Series 190S- 700
2.Pipe laying diameter under 2000mm
3.Cost Saving &Higher Cost Efficiency
4.Easy Manipulate

1.Purchase ISO 6431 DNC pneumatic air cylinder
2.Different style pneumatic cylinder
3.One year guarantee cylinder
4. Supply big bore cylinder

1. Used in the halal slaughter processing line
2. Hot galvanizing frame
3. Cylinder aluminum alloy
4. Size: 2800×1000×2350
5. Weight: 600Kg

1.Food processing machine
2.Used for pre-peeling, trimming and half-parting
3.Lifting height:400mm-2000mm
4.Table surface made of stainless steel

1. High precision, Wide application
2. EU CE Certification
3. CQC, ISO9001: 2008
4. High performance,
5. Easy to operation.

Pneumatic high-pressure small flow control valve has the advantages of small volume, light weight, high performance, for precise micro flow control.

High pressure hose,this hose is used in pneumatic paint sprayer.

Pneumatic strapping tool is the packing tool for polyester (PET) strapping &polypropylene (PP) strapping.

MGP Series new type shaft cylinder has ball guide bearing and slide bearing two types.

MGP Series new type shaft cylinder has ball guide bearing and slide bearing two types.

Standard: EN 10305-1/DIN 2391
Size(mm): O. D.: 6.0-168.0 W. T.: 1-30mm L: Max 12000mm

Pneumatic tube clutch
The clutch is widely used in all kinds of gear box of the workover rig and drilling rig for the oilfield

DNC CYLINDER, ISO 6431 cylinder, widely used. Bore size from 32 to 200 mm

1. Proof pressure:15.3kgf/cm2(1.5Mpa)
2. Max.pressure:10.2kgf/cm2(1.0Mpa)
3. Min.pressure: 0.5kgf/cm2(0.05Mpa)

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

Pneumatic Pneumatic soft and metal seal butterfly valve, for General Chemical and Industrial Services,open and close test over10,000 times,long life

The product is a rotary type valve,
good sealing performance,
flow coefficient,
flow resistance coefficient is small,
simple structure.

ZMQSY series pneumatic diaphragm type Y valve is the company according to the equipment of thermal power plant .

1. Transparent pneumatic fittings
2. O to 25 Bar pressure
3. Fit for water and air medium
4. Very good quality and fast delivery date

Standard Pneumatic Cylinders
Double Action
Single Rod