pneumatic fittings

1.Plastic one-touch fitting
2.Using on Pneumatic system
3.Smooth-Edge release sleeve design facilitates a quick tubing disconnection

Use to plug unused push in fittings.

Model:KB2E
1.Plastic one-touch fitting
2.Using on Pneumatic system
3.Smooth-Edge release sleeve design facilitates a quick tubing disconnection

In line connection of tubing to a male threaded port. External tightening with a flat wrench.

1.the fluid type:compressed air(not the other gas or liguid)
2.Working temperature:0℃~60℃:air
3.Good quality,fast delivery,competitive price

In line connection of tubing to a male threaded port. External tightening with a flat wrench or socket wrench.

Use to connect tubes in both 90°direction.Our equal tee push in fitting allows you to split one piece of hosing into two tubes of equal diameter.

1.Metalsone-touch fitting
2.Using on Pneumatic system
3.Smooth-Edge release sleeve design facilitates a quick tubing
4.Good quality,fast delivery.

Use to connect tubes in both 90°direction.Our equal tee push in fitting allows you to split one piece of hosing into two tubes of equal diameter.

SL plastic fittings for water
Size: M5 to 2"
Tube:4 to 20mm
CE ISO certification

External tightening with a flat wrench. Connection of tubing at a 90° angle to a female thread.Most general style.

Quick coupling quick joint is a pipeline connected or disconnected without tools can joint.

Use to branch line in the same direction. The Y joiner push in fitting allows you to split one air hose into two pieces of hosing of equal diameter.

fast installation,simple and smart, save space.Various types of pneumatic pipe layout, to meet any need.
Good quality,fast delivery,competitive price

Useful on pneumatic control valves or cylinders equipped with cartridges.Connection of tubing at a 90° angle to a push-in fitting or cartridge.

fast installation,simple and smart, save space.Various types of pneumatic pipe layout, to meet any need.
Good quality,fast delivery,competitive price

Use to four branch line.The equal cross push-in fitting allows you to split one piece of hose into three pieces (of equal diameter).

Fluid Type: Air(No other gases or liquids)
Working Pressure:0-150Psi
Negative pressure: -29.5 in Hg
Good quality,fast delivery.

Use to connect tubes in the same direction. Straight union is perfect for repairing cut sections of hose or joining two equal diameter pieces of tube.

fast installation, simple and smart, save space.Various types of pneumatic pipe layout, to meet any need.

Use to connect tubes at right angles.Two tubes connect at a 90 degree angle in this high quality push-in fitting. Allows for full air-flow.

*Fluid Type: Air(No other gases or liquids)
*Working Pressure:0-150Psi
*Negative pressure: -29.5 in Hg

Use to branch line in the same direction from Push in fittings. Tube size and Stem size are different.

A Type: Tube O.D: 1/4'' & Tube O.D : 1/4''
B Type: Tube O.D: 3/8'' & Tube O.D : 3/8''
C Type: Tube O.D: 3/8'' & Tube O.D : 1/4''
Good qual

Plug-in Y
Use to branch line in the same direction from One-touch fittings.

PC Water fittings
ISO CE certification
Size: M5 to 1" 6mm to 16mm
Good quality, Fast delivery,competitive price.

Use to branch line in the same direction from female thread.

Fluid Type: Air
Working Pressure:0-150Psi
Negative pressure: -29.5 in Hg
Working temperature:0-60℃

Use to branch line in the same direction from male thread.

fast installation,simple and smart, save space.Various types of pneumatic pipe layout, to meet any need.
Good quality,fast delivery,competitive price