pneumatic fittings

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

Pneumatic Fittings ZD334

1. staight, elbow, Tee, fitting, mufflers
2. brass plating material
3. BSP, NPT, PT thread option
4. CE ISO certification
5. High quality

In line connection of three tubes of equal tube ΦD.

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

Pneumatic Fittings ZD335K

1. C011 US push in fittings
2. CE ISO certification
3. M5 to 1" thread
4. NPT, PT, PP thread all ok
5.Material:brass

Connection at a 90° angle of three tubes of equal tube ΦD.

Pneumatic Fittings ZD335LO

Distribution of air between 4 tubes at a 90° angle.

Pneumatic Fittings ZD350LO

is_customized:Yes
Brand Name:SmartSolu
Material:Stainless Steel
Head Code:Hexagon
Connection:Male

Pneumatic Fittings ZT757

External tightening with a flat or socket wrench, internal adjustmeent with an Allen wrench.In line connection of tubing to a female threaded port.

Pneumatic Fittings ZT758

Tightened on the top of the fitting by use of a flat wrench or a socket wrench.Connection of tubing at a 90° angle to a female threaded port.

Use together with male elbow. Difference is that it's used with fittings to avoid from interfering with each other by making the piping two-level.

Multiplex connection possible. Use to branch line in the same direction or at the right angles from male or female thread.

Use to connect male thread and tube through a panel. Nickel-plated brass threaded bodies ensures anti-corrosion and anti-contamination.

Most general style. Connection of tubing at a 90° angle to a female thread. External tightening with a flat wrench. 360° swivel.

Connection of two tubes at a 90° angle to a female thread. External tightening with a flat wrench.

Connection of two tubes at a 90° angle to a male thread. External tightening with a flat wrench.

1.Plastic one-touch fitting
2.Using on Pneumatic system
3.Smooth-Edge release sleeve design facilitates a quick tubing disconnection
4.Model:PB

Connection of two tubes at a 90° angle to a male thread. External tightening with a flat wrench.

One Touch Tube Fittings with O-ring are equipped with O-ring on the thread, by which sealing is very well, and suitable for G and BSPP thread.

Miniature Fitting is 40% smaller than the standard type pneumatic fitting,which can be used an ultra compact alternative where space is at a premium.

pneumatic component(QPUT)
Fluid Type: Air(No other gases or liquids)
Working Pressure:0-150Psi
Working temperature:32 -140°F / 0-60℃

External tightening with a flat wrench. Use to pipe at right angles to male thread.

The product saves time and effort, and, fuel-efficient, energy saving and environmental protection, economic benefits. Is your best choice.

Use to branch line in the same direction from male thread and in 90° direction.