plastic extrusion machine

The PET strapping band production line uses the waste mineral water , bottle as the main raw material. It has the low cost and high
efficiency.

mini pe extrusion blow moulding machine
1)Small-sized extrusion bottle blowing machine.
2)Producing multi-type products in small batches.

PE pipe production line mainly consists of PE single screw extruder, PE pipe special using mould, PE pipe vacuum calibration water tank, drawing machi

PE pipe extrusion machine

PVC ceiling board extrusion machine
1.Application: PVC ceiling board
2.Air pressure:0.6Mpa
3.Total power:90kw
4.Main motor power:37kw

PE pipe production line mainly consists of PE single screw extruder, PE pipe special using mould, PE pipe vacuum calibration water tank, PE pipe draw

SJ65/33 HDPE pipe extrusion line
1.New energy--saving technology
2.High output extruder
3.High accuracy
4.Long using life and good performance

This production line is capable of producing WPC, PC,PP,PE, hollow grid board. the product is widely used for building, decorating,

1.Model:SJ120/30
2.Molding blocks:4 pcs
3.Capacity:200-300kg/h
4.Board width:800-1500mm

PP film crushing and washing extrusion machine is automatically controlled from feeding to drying.PE, PP film, bottles, bags, woven bags, sacks

The lines are stable and reliable in continuous production.and our purpose is create value for our costomers .

PVC roof tile extrusion machine
1.Drawing power:2.2kw
2.L/D:22:1
3.Capacity:150-200kg/h
4.Line speed:0.5-5m/min

The Special grooved feeding bush with water cooling system results in increasing compression and filling factors.

1.Haul off power:1.1kw
2.Cutting power:0.37kw
3.Material of screw:38CrMoAlA
4.Material of barrel:38CrMoAlA

PVC pipe extrusion machine:
1.for water supply and drainage pipes
2.Max.production speed:12m/min
3.pipe range:20-630mm
4.130-800kghr

Hot air is blown onto the heat activated adhesive immediately before it is laminated onto the product by a thermostatically controlled

1.Heating zones:4 zones
2.Heating power:2kw
3.Cooling zones:4 zones
4.Cutting power:0.37kw

They are stable and reliable in continuous production.unique in design,competitive in price.

WPC substitute natural wood, that protects forest resources. WPC uses plant fiber, that reduces environmental pollution.

PVC decorative board extrusion machine
1.Motor power:75kw
2.Capacity:300-400kg/h
3.Board thickness:2-10mm
4.Heating power:36kw

plastic sheet machine is made up of screw extruder, mould , three- roll calender , colling suporting frame, tractor ,cutting machine and stack frame

PVC decorative sheet extrusion machine
1.Motor power:75kw
2.Capacity:300-400kg/h
3.Board thickness:2-10mm
4.Heating power:36kw

The line is mainly used for Wood-plastic or PVC single layer or multi layer foam boards . suitable in the fileds of construction, household appliance.

PVC wave board extrusion machine
1.Die type:T type
2.Screw diameter:65mm
3.Capacity:150-200kg/h
4.Line speed:0.5-5m/min

PVC wave tile extrusion machine
1.Drawing power:2.2kw
2.Screw diameter:65mm
3.Capacity:150-200kg/h
4.Working air pressure:0.4-0.6Mpa

Specifications
pe insulation pipe production line
1. high output plastic pipe extrusion line
2.single screw pipe extrusion line

1.Screw rotating speed:5-70r/min
2.Driving motor:22kw
3.Max output:100kg/h
4.Heating zones:4 zones

This PVC Fiber reinforced pipe extrusion line consists of extruder, water-spraying tank, hauling-off unit, fiber-rolling unit, coiler, etc.

1.Capacity:300kg/h
2.Main motor power:132kw
3.Size of roller:1800*490mm
4.Total power:250kw

pvc twin pipe production line 1. stable running 2.1 year guarantee ,long service life 3. high output and efficiency 4.Line speed : 2-12m/min