nickel alloy wire

FeCrAl resistance wire: superior oxidation resistance, lower raw-material cost, density and thermal expansion coefficient than Ni base super alloys

FeCrAl 1Cr13Al4: Ferritic alloy. Is used in surtur & sulfide environment & producing industrial electric furnace, household electrical appliances.

Nichrome 80/20 wire has excellent resistance to high temperature oxidation & corrosion & good wear resistance.Good deformation. Diameter10.0 mm-0.05 m

A nickel-base alloy with exceptional combination of oxidation
resistance, fabricability and high-temperature strength.
Wire Diameter:0.05mm -10.0mm

FeCrAl 0Cr27Al7Mo2:High temperature wire. Used in appliances where it has high resistivity and good oxidation resistance are of particular importance.

FeCrAl 0Cr21Al6Nb is ferritic iron-chromium-aluminium alloy which is used at temperatures to 1350°C.Used in high-temperature furnaces in heat treating

FeCrAl 0Cr21Al4 alloy can replace Kanthal series. It is used for industrial furnaces, kilns & other equipment with highest operation temperatures.

It has characteristics of high resistance,low temperature coefficient of electric resistance, high operating temperature & good corrosion resistance.

H13YU4 (0Cr13Al4) posses the characteristics of high resistance, low temperature coefficient of electric resistance and good corrosion resistance.

Invar alloy contains iron, nickel and carbon and is expansion alloy. It has been used in a wide variety of glass-to-metal sealing applications.

Haynes Alloy is a cobalt-based alloy which combines good formability and excellent high-temperature properties.
Mesh: 0.5-250 mesh/Inch

Incoloy 825 mesh/Screen:High resistance to reducing-oxidizing acids;resistant to aqueous corrosion,sulfuric,phosphoric acid.High Bearing ability

FeCrAl alloy wire:High resistance,excellent oxidation properties & high operating temperature, higher melting point & lower price.Corrosion resistance

FeCrAl 0Cr25Al5 is a high-temperature ferritic Alloy. Is used in electrical heating elements in industrial furnaces and in the appliance industry.

FeCrAl H23YU5(0Cr23Al5) is widely used in household electrical appliance,heating elements,mechanical manufacturing and other industrial fields.

Multimet N-155 Wire mesh:Good Strength, Excellent high-temperature strength & good oxidation resistance up to 1800°F (980°C).Sizes: 0.5-250mesh/inch

Inconel 622 Wire:resistance to corrosion, stress-corrosion cracking, pitting and crevice corrosion,reducing and oxidizing acids. Dia:0.05mm-10mm

High resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.

Hastelloy C22 enhances resistance to pitting, crevice corrosion, stress corrosion cracking and oxidizing aqueous media.

High resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.

Inconel 617 Wire: high-temperature strength,resistance to oxidation resistance,corrosive environment, reducing and oxidizing media.
Dia:0.05-10.0mm.

Monel alloy K500 Wire: Combines the excellent corrosion resistance of Monel 400 and the added advantage of greater strength and hardness.

Monel alloy 400 Wire: Corrosion resisting. Resistant to salt and caustic solutions, sea water and steam at high temperatures.Dia:0.05mm-10.0mm

Incoloy 800H Wire: Excellent corrosion resistance in the water media of the extremely high temperature of 500. Good stress corrosion resistance.

Inconel 718 wire: Good resistance to a wide variety of corrosives, significantly better than martensitic, ferritic, and austenitic stainless steels.

Incoloy 330Wire:good high-temperature strength and corrosion resistance.Solid solution composition and not hard enable by heat treatment.Dia:0.05-10mm

Monel R-405 Wire:Good corrosion-resistance,weld ability and high strength.Resistant to sea water,steam salt and caustic solutions. Dia:0.05mm-10.0mm

Monel 404 Wire:low magnetic permeability,excellent brazing characteristics and good strength at outgassing temperatures.Dia:0.05mm-10.0mm

Monel 401 Wire: Good ductility,good brazing, low temperature coefficient of resistance and medium-range electrical resistivity. Dia:0.05mm-10.0mm

Alloy 902 Mesh:nickel-iron-chromium alloy made precipitation hardenable by additions of aluminum & titanium.Mesh: 0.5-250mesh.