metal bellow seals

Equivalent to Burgmann MFLWT80 METAL BELLOW SEALS ,For big compressors and industrial pumps .MFLWT80 metal bellow for high temperature use in oil pump

Burgmann MFLWT80 Metal Bellow Mechanical Seal
For unstepped shafts
Single Seal
Balanced
Independent of direction of rotation

Advantages
For extreme high temperature ranges
No dynamically loaded O-Ring
Self cleaning effect
Short installation length possible

Johncrane680 metal bellow mechanical seal
for general-purpose applications
a standard for low-temperature applications

Operating Conditions:
Temperature:-75oC~400oC
Pressure: ≤2.0Mpa(Single) ≤6.0Mpa(Double)
Speed: ≤ 23m/Sec

Johncrane type 609 metal bellows seal

EQUIVALENT TO JOHN CRNE606
mechanical shaft seals JOHN CRANE 609 metal bellow for high temperature use in oil pumps and chemical pumps

standard,single seal,balanced,independment of direction of rotation,metal bellows.

mechanical seals

EQUIVALENT TO BURGMANN MFL85N
Depending on the material chosen and the specific design.in environment with temporature ranging from -330F to 800F

Our MFL85N is replacement of burgmann seal ,for unstepped shafts, single and balanced seal, with metal bellows rotating and independent of rotation.

Mediums:Oil,light hydrocarbon,aromatic hydrocarbon, organic solvents,weak acids, alkali,Ammonia,etc.
No leakage mechanical seals

Elastomer Bellow Seals type FBD
single -spring design.with good scalability
temperature:-20℃ to +120℃
Pressure:<<1.4mpa
Speed:<<15m/s

Elastomer Bellows Mechanical Seals

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Because of more than twenty years experiences, we become one of the leading manufacturers of die casting and mechanical seals in china

Productivity:2000Sets/Month;Min. Order:10 set;Packing:individual packs;Transportation: by sea or by air;DeliveryDate:20days;PaymentType:TT or others;

pressure:1.2Mpa
speed:20m/s
temperature:-20~120
Material Combined:
Stationary Ring(Ceramic/SIC/TC)...

GW1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

Elastomer Bellow Seals CR70
temperature:-30℃ to +200℃
Pressure:<<0.6mpa
Speed:<<15m/s

1.Stationary Ring:ceramic/SIC/TC
2.Rotary Ring:carbon/SIC/TC
3.Secondary Seal:NBR/EPDM/VITON
4.Spring&Metal Parts:SUS304/SUS316

Bellows:
Inconel® 718 (M6), Hastelloy® C-276 (M5)
Seal face:
Carbon graphite antimony impregnated (A), Silicon carbide (Q12)
Seat:

EQUIVALENT TO JOHN CRNE609
mechanical shaft seals JOHN CRANE 609 metal bellow for high temperature use in oil pumps and chemical pumps

REPLACEMENT OHNCRNAE 515E FORMED BELLOW MECHANICAL SEALS

Bellow type mechanical seals,mechanical seals
Metal bellow seals Size: 16mm~100mm

We could design and manufacture pump seals as your requirement.Of course,we promise our price is very competitive and the quality is high

Elastomer Bellow Shaft Seals

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

Rotary Ring:Resin Impregnated Carbon Graphite(Furan),Antimony Impreg. Carbon Graphite,Silicon Carbide Sintered Pressureless

The company is the known Teflon Bellow Seals Manufacturer,