mesh screen

FeCrAl Mesh/Screen: Twilled Woven:high resistance, excellent oxidation properties high operating temperature; much higher melting point, lower price.

Titanium wire mesh provids excellent corrosion resistance, good weldability, and easy processing and fabrication but at a relatively low strength.

Rene 41 is a precipitation hardening, nickel-based high temperature alloy possessing high strength in the 1200/1800ºF (649/982ºC) temperature range.

Haynes Alloy is a cobalt-based alloy which combines good formability and excellent high-temperature properties.
Mesh: 0.5-250 mesh/Inch

H13YU4 (0Cr13Al4) posses the characteristics of high resistance, low temperature coefficient of electric resistance and good corrosion resistance.

H23YU5T (0Cr23Al5Ti) has characteristics of high resistance, low temperature coefficient of electric resistance, and high operating temperature.

0Cr21Al6Nb is a high-temperature, ferritic iron-chromium-aluminium alloy (FeCrAl alloy) which can be used at temperatures up to 1350°C.

0Cr27Al7Mo2 can be used in appliances where its high resistivity and good oxidation resistance are of particular importance.

0Cr21Al4 alloy can replace Kanthal series, is primarily used for industrial furnaces, kilns and other equipment.

Monel 400 Wire Mesh/Screen:Resists salt and fresh water at high temperatures. Good around most food; resistant to sea water and caustic solutions,etc.

High Quality Nickel Mesh / Screen Anode for Fuel Cell. Purity:>99.6%, Is widely applied in fuel cell as electrode and catalyzer.Wire Diameter 0.25mm.

Nickel Wire Mesh/Screen is weaved of nickel wire with purity over 99.5%. Thickness: Min0.05mm,Mesh: 0.5-250 mesh/Inch. Has excellent heat resistance.

Monel Mesh/Screen for oil well Industry instruments:Excellent corrosion resistance&added advantage of greater strength&hardness.High yield strength.

Nickel Chromium Mesh/Screen: Ni80Cr20:Good anti-corrosion, resisting to oxidation at high temperatures. High melting point of about 1400 °C (2552 °F)

Inconel 600 Wire Mesh is a nonmagnetic, nickel-based high temperature alloy possessing an resistance to ordinary form of corrosion. Mesh:0.5-250mesh.

Monel K-500 Mesh/Screen:Excellent corrosion resistance of Monel 400 and greater strength and hardness. For Sour gas and Oil well industry instruments

Nickel chromium alloy Ni80Cr20 Mesh/Screen: anti-corrosion, melting point of about 1400 °C (2552 °F).Carrier or conveyor belt used in high temperature

Copper Nickel 10 Alloy Wire Mesh/Screen: resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

Cu-Ni 5 Alloy Wire Mesh/Screen:Corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and salt solutions and organic acids

Copper Nickel C715 have excellent resistance to bio-fouling&corrosion in sea-water.Extraordinary resistance.Mesh: 0.5-250mesh, Thickness:0.05mm above.

Inconel 050 Mesh/Screen:Forsevere deep sour gas well environments,good thermal stability,resistance to corrosion and stress cracking.Mesh:0.5-250

Incoloy DS Wire Mesh:adding of silicon,good high-temperature strength and excellent resistance to oxidation and carburization.Mesh: 0.5-250 mesh.

Incoloy 945 Wire Mesh/Screen has high-strength & corrosion-resistant. It resists to chloride,general corrosion and localized attack.

Invar 36 wire mesh/screen:Alloy 36 wire mesh-nickel iron alloy wire mesh:has thermal expansion of one tenth that of carbon steel up to 400ºF(204ºC).

Alloy 42 wire mesh is alloy with high magnetic permeability; low expansion till 300°Cand it matches the expansion of soft glass .Mesh: 0.05-250mesh

Alloy 48 wire mesh/screen has expansion that matches soda-lead and soda-lime glass. Used as leads for electronic applications.Mesh: 0.5-250mesh.

Inconel HX Wire Mesh/Screen is made of Ni-Cr-Mo alloy with oxidation resistance and exceptional strength at up to 2200°F.
Mesh: 0.5-250 mesh

Inconel 722 mesh/screen demonstrates a high level of resistance to various forms of corrosion and the capacity to remain effective at high temperature

Inconel 706 Wire Mesh has high mechanical strength and good fabricability, resistance to oxidation,corrosion and weld strain-age cracking.Mesh: 0.5-2

Inconel 622 Wire Mesh/Screen is resistance to stress-corrosion cracking, pitting and crevice corrosion,reducing and oxidizing acids.
Mesh: 0.5-250