melting point tester

It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.

The instrument is applied to determine Fraass Breaking Point of bituminous materials.

This dropping point tester is applied to test the dropping point of lubricanting grease over 100 degree centigrade.

1. GD-262 Petroleum Product Aniline Point Tester.
2. Equiped with electric heater.
3. Automatic detect end point.

applied to determine the softening point of petroleum asphalt, coal pitch, liquid petroleum asphalt, and various other asphalts.

This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D

DSHD-510G Solidifying Point Tester

DSHD-0613A Automatic Fraass Breaking Point Tester is designed and developed as per T0613 "Asphalt Breaking Point Test (Fraass Methods) in the Industr

Dropping Point of Lubricating Grease Tester:
Test the dropping point of lubricating grease,solid hydrocarbon and temperature.

The instrument is designed and made as per GB/T3535 Standard Test Method for Pour Point of Petroleum Oils and GB/T6986 Test Method for Cloud Point of

Determination of Dropping Point and ASTM D566 Standard Test Method for Dropping Point of Lubricating Grease.

This instrument is designed and made as per test method one in national standard of People's Republic of China GB/T262 Petroleum Products and Hydroca

DSHD-267 Open Cup Flash Point Tester is applies to determine the flash point and fire point of lubricating oil and Dark petroleum products.

This dropping point tester is applied to test the dropping point of lubricanting grease over 100 degree centigrade.

make determination for 3 pieces of samples at the same time, and calculate the average value of three test data. It uses computer to control cooling

It is used to determine crystallizing point of refined naphthalene, which is made by washing, rectifying or pressing distillate containing naphthalene

DSHD-0613 Asphalt Breaking Point Tester is designed and developed as per T0613 "Asphalt Breaking Point Test (Fraass Methods)"in the Industry Standard

Pour and Cloud Point Tester:
Power: 1000W
double slots
four holes with same temperature

This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D

It is suitable to determine solidifying point and cold filter plugging point of petroleum products.

The instrument is designed and made as per standard of People's Republic of China GB/T510 Test Method for Solidifying Point of Petroleum Oils.

The cold filter plugging point tester is suitable to determine the cold filter plugging point of distillate fuel.

DSHD-270A Lubricating Grease Dropping Point Tester is designed according the industry standard SH/T0115 Test Method for Dropping Point of Lubricating

determine Fraass Breaking Point of bituminous materials.pread a layer of asphalt thin film on a specially designed metal sheet, and place it

1.ASTM D92 ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.
2.GB/T3536-2008 Petroleum Products - Determination

DSHD-270A Lubricating Grease Dropping Point Tester is designed according the industry standard SH/T0115 Test Method for Dropping Point of Lubricating

The instrument is specially designed and made as per national standard GB/T510 Standard Test Method for Solidifying Point of Petroleum Products.

The instrument is specially designed and made as per standard of People's Republic of China GB/T510 Test Method for Solidifying Point of Petroleum Oil

It is suitable to determine the solidifying point at a temperature range: -20℃~+80℃.

DSHD-706 Self-ignition point tester is applied to determine the lowest temperature when fire resistant oil combusts in a flask.