melting point tester

the whole test procedures can be automatically controlled by the microprocessor. It is the best choice in similar instruments.

DSHD-2806H Automatic Asphalt Softening Point Tester

It is suitable to determine softening point of petroleum asphalt, coal pitch, liquid petroleum asphalt, and other asphalts.

1.Vicat softening temperature Tester,
2 ., It is used to determine heat distortion temperature and Vicat softening temperature of high polymer

is
applied to determine the softening point of highway asphalt,
coal pitch, liquid asphalt and other types of asphalt, etc.

This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points

Small desktop structure. LCD display. Light touch panel. It can determine two samples at a time. Easy to use and results reliable.

The instrument is designed and made as per the national standard of People's Republic of China GB/T 4929 Lubricating grease- Determination of Droppin

1.GD-5208 Rapid Closed Cup Flash Point Tester for paints, adhesives, solvents, oils ,petroleum,etc
2.LCD Display,microprinter

It is suitable to determine softening point of petroleum asphalt, coal pitch, liquid petroleum asphalt, and other asphalts.

The instrument is designed and made as per the National Standard GB/T4929 "Test Methods for Dropping Point of Lubricating Grease

The close cup flash point tester is designed and made as per the National Standard GB/T261 "Test Methods for Flash Point of Petroleum Products

DSHD-2806G Automatic Asphalt Softening Point Tester

1.standard ASTM D566 GB/T4929
2.It is suitable to determine dropping point of lubricating grease.

It is suitable to determine softening point of petroleum asphalt, coal pitch, liquid petroleum asphalt, and other asphalts.

used in determining the solidifying point and pour point of petroleum products.

is applied to
determine softening point of petroleum asphalt, coal pitch,
liquid petroleum asphalt, and various asphalts.

DSHD-510Z-1 Automatic Solidifying Point & Pour Point Tester is used to determine the solidifying point and pour point of transformer oil and light oil

The design can meet requirements for determining aniline point of transparent oils according to standards GB/T262, ISO 2977 and ASTM D611

The instrument is designed and made as per the national standard of People's Republic of China GB/T 4929 Lubricating grease- Determination of Droppin

Petroleum Products solidifying point tester/instrument
1.Adopt new type of refrigeration compressor
2.Single trough two baths

This bitumen softening point tester is used to test the softening point of petroleum asphalt, coal pitch and petroleum bitumen.

GD-510Z-1 Automatic Solidifying Point&Pour Point Tester is made as per standards GB/T 510 Standard Test Method for Solidifying Point

1.GB/T3536 "Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods)
2.ASTM D92 Standard Test Method for Flash

3. DSHD-3069 Naphthalene Crystallization Point Tester

It is used to determine the deformation of asphalt when heated.
Relative standards: ASTM D36, IP58;

determine the softening point of bituminous materials like asphalt, coal pitch, and liquid asphalt, etc. The instrument is the best choice of asphalt

DSHD-2806E Asphalt Softening Point Tester is applied to
Determine the softening point of asphalt, tar, liquid asphalt and
other types of asph

is used to determine Fraass Breaking Point of bituminous materials.

1.Plastic Point load Tester (MFR AND MVR )
2 . determine the melt mass flow rate MFR of plastic materials
3 Easy opreation
4 LCD display .