mechanical seals

Operating limits
Specification: 18~80mm
Pressure: ≤1.0Mpa
Temperature:- -20~180℃
Linear speed:≤15m/s...

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2650/3102/4630/4660/5520. 25MM MECHANICAL SEALS FOR GRIPOC PUMPS

easiest seal for a mechanic to install. Only being required to slide onto the pump shaft and bolt to the pump gland

CRN PUMP seal, CR SERIES SEAL. single spring o-ring mounted semi-catridge seals with push-fit head,suit for CENTRIFUGAL pumps repair. CRN32 pump seal

Features
For unstepped shafts
Single seal
Balanced
Independent of direction of rotation...

replacement the original pump 2070.2102-040. 3082 our parts are specifically developed or selected to work perfectly in flygt pumps

Flygt mechanical seals are usually used in the Swedish ITT Flygt mixer. They are one of the essential Flygt pump parts for Flygt pumps.

The FT05Z is a seal, which can be categorized as a pump seal. It is an alternative to the Flygt 713 90 00, Grindex 50 420 00 (Lower Seal)

O-ring mounted seats,according with DIN24960 standard.

Temperature: -30℃ to +200℃
Pressure: ≤1.2MPa
Speed: ≤20m/s

carbon graphite, silicon carbite, tungsten carbite, alumina ceramic, cartrige seals, flange machine tool seals.

this seal is standard for use where expensive and corrosive liquids are being processed.

1. Longitudinal
2. Limited Speed
3. Circular form

Applied for household pumps, water pumps and submerisble pumps.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20 to 100 degree celsius

1. general mechanical seal of having competitive price
2. used widely in water pumps
3. MOQ: 1000 sets

1. used for submersible pumps, sewage pumps
2. single spring mechanical seal
3. MOQ:1000 sets
4. OEM offered

Stationary seat and/or seal face replaceable
Can be adopted under positive pressure or under back pressure
Operation in vacuum without additional se

Pressure: p = 12 bar (174 PSI)
Temperature:
t = -20 °C ... 160 °C (-4 °F ^ +320 °F)
Sliding velocity: ... 20 m/s (66 ft/s)
Viscosity: ... 300 Pa

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

Mechanical parts

Hangzhou Sealcon Fluid Machinery CO.,Ltd was established in 2011,with Sealcon trademark we specialized in mechanical seal design.

Rotary Ring: Carbon/SiC/TC
Stationary Ring: Ceramic/SiC/TC
Secondary Seals: NBR/FPM/EPDM; PTFE
Spring & Other Parts: SS304/SS316/SS316Ti

.Low thermal expansion
.OEM service is available

medium of pump mechanical seal:water,oil and other low corrosive medium

single spring mechanical seal
Pressure: ≤0.8Mpa
Speed: ≤10m/s
Temperature: -20℃~150℃

OPERATING LIMITS:
1.Pressure: 1Mpa
2.Speed: 10m/s
3.Temperature: -30℃~200℃

1.materials:ca/ce/nbr/steel,etc
2.size:3/8" to 1"
3.made in china
4.professional manufacturer

Hangzhou Sealcon Fluid Machinery CO.,Ltd was established in 2011,with Sealcon trademark we specialized in mechanical seal design.

Single seal for Waukesha Universal I series.Waukesha Pump Seal with Features of Water Oil Resistant.Waukesha Cherry-Burrel® U1 Sanitary pump seals

Single-Spring Mechanical Seal type VULCAN97
temperature:-50℃to +200℃
Pressure:<<1 Mpa
Speed:<20m/s
media:clean water, sewage water,Oil