mechanical seals

mechanical seals parts series
1. Semi-conductor process tools and fixture
2. Mechanical seals
3. High strength kiln furniture

Dry contact secondary seal
Prevention of hazardous emissions
Can be used as a secondary seal of tandem seal in liquid applications

Seat Type:
Standard:TBBP
Alternative:TBBO
Applications:Clean water,sewage water,oil and other moderately corrosive fluids.

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

TYPE9B mechanical SEALS. JOHN CAREN 109B SEALS
john crane mechanical seals. Standard for use where expensive and corrosive liquids are being

Operating limits
Specification:38~127mm
Pressure:≤25bar
Temperature:-20℃~400℃
Linear speed:15m/s

for industrial pump, replace the mechanical seal of John Crane 8-1
Seat Type:
Standard:TBN
Alternative:TBT21

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Multiple spring seal. Balanced design.for industrial pump, replace the mechanical seal of Burgmann and John Crane. Equivalent to Burgmann AX40K seals

Introduction:Operating limits
Mediums to be sealed :water , oil , middle corrosion liquids and other mediums including solid granule

instead of AES T05GH seal
Supplied with removable setting clip
If you have any interest in our products, please do not hesitate to contact us.

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Carbon/SiC)
Retainer(SUS304/SUS316)
Spring(SUS304/SUS316)
Spring Holder(SUS304/SUS316

AES T01F PARTS SUIT FOR FRISTAM PUMPS.
Inboard Mechanical Seal (Washer)
Rotary Unit With Washer Driver.
Size : 22mm ,30mm ,35mm

Alternative:TBBO
for industrial pump, replace the mechanical seal of John Crane 58U
Standard:TBBP

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

Replacement burgmann AX25 MECHANICAL SEALS. WORKKING WELL FOR PUMPS

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Combined Materials
Stationary Ring (Carbon / Sic / TC)
Rotary Ring (Carbon / Sic / TC/ SUS304)
Secondary Seal (NBR / EPDM / Viton)
Spring and Punc

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Operating limits
Pressure:≤1.2MPa
Temperature:20℃~200℃
Linear speed:≤25m/s

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

pump seal mostly use: average corrosion mediums, such as water,
oil, weak acid,weak alkali, etc.

Operational Conditions:
Temperature: -30℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

Features
Rubber bellows mechanical seal
Unbalanced
Single spring
Independent of direction of rotation...

Stationary Seat: SSiC, SiC, TC.
Operating Limits:
Temperature: < 200oC
We mainly supply high quality mechanical seals.

Applications: Oil,light hydrocarbon,aromatic hydrocarbon, organic solvents,weak acids, alkali,Ammonia,etc.
Size: 16mm~100mm