mechanical seal

O-ring Mechanical Seal CR82
temperature:-20℃ to +180℃
Pressure:<<1.2mpa
Speed:<<15m/s

1. Stationary Ring:ceramic/SIC/TC
2. Rotary Ring:carbon/SIC/TC
3. Secondary Seal:NBR/EPDM/VITON
4. Spring&Metal Parts:SUS304/SUS316

It to suit I.M.O pump with size 22mm. pump mechanical seal parts for triple rotors screw pump
fuel oil supply system for ship in marine.

1. Matched for Grundfos Pumps;
2. High performance;
3. High wear,corrosion resistant;
4. OEM, ODM

Teflon Bellow Mechanical Seals

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

PTFE Wedge mechanical seals
Operating Conditions:
Temperature:-40oC~250oC
Pressure: ≤2.5Mpa
Speed: ≤ 20 m/Sec

Type 4610 cartridge seal,compact, single-cartridge seal,meets key industry pump standards, and is designed to permit use in rotating shaft equipment

Shaft diameter: 45-300mm (the dimension can also be customized)
Material: 316L or 2205 or 2507 or TA2+hard alloy or silicon carbide (SiC)

For many water-based applications, such as wastewater treatment, potable water, HVAC, Pool & Spa, and other general applications.

OPERATING LIMITS:
1.Pressure: ≤0.6Mpa
2.Speed: ≤10m/s
3.Temperature: -30 ℃~200℃

operational conditions:
Temperature:-20~200℃
spring:<13m/sec
pressure:<0.8Mpa

TBMTN mechanical seal
For industrial pumps
Replacing the mechanical seal of Burgmann M7N
Pressure: ≤1.2MPa
Speed: ≤15m/s

SIHI PUMP STERLING GNZ SEALS. Standard balanced mechanical seals. The friction side of the rotating portion is made from silicon carbide .

O Ring Mechanical Seals

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

Packing:cartons;Transportation:by sea or by air;DeliveryDate:3 weeks;PaymentType:100% by T/T in advance;Trademark:dyseals;Specification:10-100mm;Cert

High qulity AES CDSA Double Cartridge Seals.The standard seal unit is 316 Stainless Steel with Carbon and Silicon Carbide faces and Viton O' rings.

this kind of mechanical seals parts is used in mechanical seals.it is very popular in this line.

Single Spring Rubber Mechanical seal(HX82)
Type 502

Professional manufacturer & exporter;
More than 30 years' OEM, ODM experience;
Products can be replaced of John crane.

To absorb both breakout and running torque, the seals are designed with a drive band and drive notches that eliminate overstressing of bellows.

OPERATING LIMITS:
1.Pressure: ≤1.2Mpa
2.Speed: ≤12m/s
3.Temperature: -30 ℃~200 ℃

instead of original Flygt seal
Monolithic stationary faces
Supplied with removable setting clip

Single Spring Mechanical Seals
Replace of burgmann type BT-RN
Temperature:-40℃to +200℃
Pressure:<1.0mpa
Speed:<15m/s

An economically priced seal with conical spring for a wide range of applications.Recommended for tandem pumps,clean water pumps and pumps for home.

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

CMS mechanical seals Type 902 is Single Cartridge Mechanical Seals.
]

Centralized structure, universai purpose components, directionless drive,necessary with hydraulic pump station owing to its small radial mounting size

Manufacturer of Mechanical Seal in China for various pumps, such as submersible pumps, circulation pump, centrifugal pump,used in industries including