mechanical seal

the materials of mechanical seal are graphite, ceramic, slicon carbide, nitrile rubber, nitrile rubber hydride, fluoro carbon rubber, chromium-nickel

Temperature:
Temperature:-30℃ to +200℃
Speed:≤15m/s

this mechanical `s materials is SS304 or ss316. it is very well.

It has a wide application scope and high interchangeabliblity

mechanical seal RC891
equivalent to chesterton 891 seal
Temperature: -40 to 230 centigrade degree
Material: car/sic/TC/cer

We can produce various kinds of Auto cooling pump seals

Stationary ring of mechanical seals is used in mechanical seals .

Stationary ring of mechanical seals is used in mechanical seals .

mechanical seal RC891
equivalent to chesterton 891 seal
Temperature: -40 to 230 centigrade degree
Material: car/sic/TC/cer

Working Conditions
Pumps:All types of rotating equipment,such as centrifugal pumps,agitators,for most general and light chemical dutiea,wherever a

Working Condiitions
Pressure:≤0.6Mpa
Speed:≤10m/Sec
Temperatur:≤-20℃~200℃
Medium:Water,oil and weakly-corrosin mediums,etc ...

Working Condiitions
Pressure:≤0.5Mpa
Speed:≤12m/Sec
Temperatur:≤-20℃~200℃
Medium:Water,oil and weakly-corrosin mediums,etc ...

Working Condiitions
Pressure:≤0.8Mpa
Speed:≤10m/Sec
Temperatur:≤-20℃~100℃
Pumps:Submersible pumps and common multi-stage deep well pum

Working Conditions
Pressure: ≤0.8MPa
Speed: ≤10m/Sec
Temperatur: ≤-20℃-150℃
Medium: Water,oil,and weakly-corrosive mediums,etc.

Working Conditions
Pressure: ≤0.8MPa
Speed: ≤10m/Sec
Temperatur: ≤-20℃-150℃
Medium: Water,oil,and weakly-corrosive mediums,etc.

Working Conditions
Pressure: ≤0.8MPa
Speed: ≤10m/Sec
Temperatur: ≤-20℃-150℃
Medium: Water,oil,and weakly-corrosive mediums,etc.

Working Conditions
Pressure: ≤0.8MPa
Speed: ≤10m/Sec
Temperatur: ≤-20℃-150℃
Medium: Water,oil,and weakly-corrosive mediums,etc.

Equal to AES CONII Cartridge Seal;
Advantages:1) easy installation,2)balanced seal face,3)modern user friendly design,4)perfect general service seal.

mechanical seal-RC502
Pressure: Up to 40bar
Speed: Up to 20m/s
Temperature: -30 to 180 centigrade degree

Mechanical Seals CRT50
Equal to AES-M07 For Sanitary Pumps,
Both Single and Double Seals suit INOXPA PROLAC and SLR Pumps Muti-spring design

For blower pump, diving pump, circulating pump mechanical seal

Type SEW is a single-cartridge seal for use with clean fluids and lubricants.
Equivalent with John Crane Safematic Seal, Sh-Sc-SEW For ABS PUMPS

replacement the original seals for pump 600/3170/3201/4670/4680. our parts are specifically developed or selected to work perfectly in flygt pumps

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2135/ 2151/2201/3126/45440/4451. 35MM MECHANICAL SEALS FOR GRIPOC PUMPS

Elastomeric Bellows Seals. DIN profile seal and a standard seat, with a choice of working lengths to suit common American atandards.replace AES BP04.

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2650/3102/4630/4660/5520. 25MM MECHANICAL SEALS FOR GRIPOC PUMPS

easiest seal for a mechanic to install. Only being required to slide onto the pump shaft and bolt to the pump gland

replacement the original pump 2070.2102-040. 3082 our parts are specifically developed or selected to work perfectly in flygt pumps

Flygt mechanical seals are usually used in the Swedish ITT Flygt mixer. They are one of the essential Flygt pump parts for Flygt pumps.

The FT05Z is a seal, which can be categorized as a pump seal. It is an alternative to the Flygt 713 90 00, Grindex 50 420 00 (Lower Seal)