mechanical pump seals

good quality
sample available
competitive price
SIZE 55*72*7

suitable for many working environment
convient to install

The FT05Z is a seal, which can be categorized as a pump seal. It is an alternative to the Flygt 713 90 00, Grindex 50 420 00 (Lower Seal)

Seal type: CR-F-80
Shaft size: 80mm
Rotary material: Carbon
Stationary seat: Stainless Steel
O-rings: EPDM or Viton

Single seal for Waukesha Universal I series.Waukesha Pump Seal with Features of Water Oil Resistant.Waukesha Cherry-Burrel® U1 Sanitary pump seals

this seals suit for LFA LAVA PUMPS
All 35mm & 42mm LKH seals, models 5 thru . lava pump mechanical seal for alfa laval pump and Fristam pump

FTHRN has the same design and size as the original Bergmann HRN which can be a good substitute for the original product. suitable godwin pump

Gear Pump Seal KIt

replace brugmann BT-AR SEAL. AES B01 SEAL.
mechanical seal for mass produced water pumps.Mechanical Seal For APV Pumps |Equivalent to Burgmann BT-AR

Specifications
1.ISO9001:2008,
2.High quality & precision products,
3.high quality fuel slurry pump seal

For auto cooling pump mechanical seal

For auto cooling pump mechanical seal

Seal face: Silicon carbide (Q12), Carbon (A)
Secondary seals:
FKM (V), EPDM (E), FFKM (K)
Metal parts: CrNiMo steel (G),
Grade 5A (4T), SMO 654 (

TS21-3.375 85.73 114.3 133.35 55.55 117.5 18.3 19.9
TS21-3.500 88.9 117.48 136.53 55.55 120.65 18.3 19.9
TS21-3.625 92.08 120.65 139.7 58.72 123.8

Bellow type mechanical seals
Operating Conditions:
Temperature:-30℃~200℃
Pressure: ≤1.2Mpa
Speed: ≤ 12 m/Sec

Combined Materials:
Stationary Ring (Ceramic/SiC/TC)
Rotary Ring (Carbon/SiC/TC)
Secondary Seal (NBR/EPDM/Viton)
Spring and Metal Part (Steel)

Stationary Ring(Ceramic/SiC/TC)
Spring & Other Parts(SUS304/SUS316)

1. materials: ca/ce/nbr/steel,etc
2. size: 3/8" to 1"
3. made in china
4. professional manufacturer

Mechanical Seals Rings
It has a wide application scope and high interchangeabliblity

Advantages
For high or low temperature applications
Features
Single seal
Balanced...

replacement the original pump 2201-430,2201-320/2201-480 seals. our parts are specifically developed or selected to work perfectly in flygt pumps

Used for the original seals for pump 705/715/720/721/735/760/770/775/40/841/881/900/3400. Replacement Seals for Common I.T.T. FLYGT® Submersible Pump

Features
Stationary springs
Balanced
Independent of direction of rotation
Independent of pressure direction

we are the manufacture that producing all kings of seal like that O-ring mechanical seals series ,Elastomer Bellow shaft seals ,Grundfos mechanical se

For blower pump, diving pump, circulating pump mechanical seal

If you have any interest in our products, please do not hesitate to contact us.
for industrial pump, replace the mechanical seal of John Crane R00

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Pressure: p = 12 bar (174 PSI)
Temperature:
t = -20 °C ... 160 °C (-4 °F ^ +320 °F)
Sliding velocity: ... 20 m/s (66 ft/s)
Viscosity: ... 300 Pa

Combined Materials
Stationary Ring (Carbon / Sic / TC)
Rotary Ring (Carbon / Sic / TC/ SUS304)
Secondary Seal (NBR / EPDM / Viton)
Spring and Punc

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s