mdf terminal block

Screw:M6,Ni-plated steel
Terminal:Ni-plated brass
Housing:PA66.UL94V-0
Withstanding voltage:AC2500V/1Min
Temperature range:-40℃ to 105℃

Pin header:Tin-plated brass
Wire guard:Ni-plated phosphor bronze
Housing:PBT.UL94V-0
Max soldering:+250℃ for 5 sec.
Torque:0.4Nm(3.5 lb.in)

1 . Material: Housing-ABS UL94V-2
Base-ABS UL94V-2
Contact -0.5mm thickness
Phosphor bronze plating over nickel over silve

 
750V 32A, T

An MDF splitter for ADSL2+ over POTS separates the ADSL signal from the regular telephone signal on a telephone line.

It is for MDF which is the device terminates external communication cables and exchange or access equipments in the telecommunication system.

It adopts the IDC connection methods and consists of 20 pieces 10-pair modules

It is a must if you will be working on computer networking or cabling projects

It is is used on the vertical side of the MDF, which is used for the termination between external lines and jumper wires

It is used on the horzontal side of the MDF, which is used for the termination between internal lines and jumper wires

The short-time AC voltage inducted on external lines, when the power line, the power system or the electric railway system is broken down

For this protector, the outside line directly collides against a 220 V power line.

It has type of manual and electric. It has function of wiring the line to the MDF Supporting the use of the back line tool

1) Modular single pair design
2) Easy installations
3) Maintenance free
4) Graded 5 point protection
5) Fail Safe (FS) function

it is more convenient and efficient than manual wiring tool during the wiring

72 ports splitter terminal block | supporting ADSL2+ and VDSL | for MDF splitter ADSL2+ over POTS

400 pairs MDF terminal block, without protection, 280 x109.3x147.4 mm

It is used for wire connection for TP-1406-100 MDF terminal block.

The surge voltage caused by lightning on or around the outside lines.

It is Suitable for connection cables, modules and distribution frames

Item: Rotation Module
Part No.:GT-7006(10 pairs)
Description:
1、Insulation Resistance ≥50000 MΩ
2、Dielectric Strength ≥500V(AC voltage,5 0 Hz for

It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.

It is for MDF terminal block which forms the protection circuit for the protection of exchange room equipments and personnel against over voltage

This is Nortel block which is the device that terminates external communication cables and exchange equipments in the telecom systems

The housing of the magazine is flame retardant, high temperature resistance and aging resistance.

It adopts the IDC connection methods and consists of 16 pieces 8-pair modules. It is normally contact closed type block, when the disconnection plug

Protector can be inserted into the MDF block, with the function of protecting personnels and equipments against over voltage and over current.

Material:
Housing: 30% Glass filled PBT UL94V-0
Contacts: Brass or Phosphor Bronze
Plating: Selective gold plated: gold plated on mating area an

1)Plastic base:PA66 UL 94-V2;
2)Copper Part: brass H59,Nickle-plated;
3)Screw: M3-M3.5,Steel Zinc-plated;
4)Voltage rating:380/400V
5)Cur

This block consists of 10 pieces 10-pair modules. Our protector can be inserted into the block, with the function of protecting personnels