magnetic chuck

Powerful Round Permanent Magnetic Chuck

Electro permanent magnetic chuck is a new clamping tool for cnc machine and milling machine. 5-side processing is available for EP chuck.

A5 - A6 Electric Overhead Cr

force≥160N/cm2.

1.Permanent magnetic chuck with Nedymium magnets,strong magnetic force and less remaining magnetism

DM-QMC is convenient: the return of investment is very fast.Saving from reduced setup times, faster welding,phases and no need to replace damaged bolt

PME1225,PME1515,PME1525,PME1530,PME2040,magnetic chuck,magnetic tools

Round Electro permanent magnetic chuck

Electro permanent magnetic chuck is a new clamping tool for cnc machine and milling machine. 5-side processing is available for EP chuck.

1.Parrallel fine pole pitch:2 mm(1.5mm of steel+0.5mm of brass)
2.Nominal holding force:120N/cm2

It's a new-type magnetic chuck using electrical impulse to "ON" or "OFF" magnetic force.

larger pole electro permanent magnetic chuck
High-density polar version comprising size 50 poles with a force of 380 kgf for each pole.

Series:MCC

Fine Pole permanent magnetic Chuck

Electro permanent magnetic chuck is a new clamping tool for cnc machine and milling machine. 5-side processing is available for EP chuck.

1.Parrallel fine pole pitch:2 mm(1.5mm of steel+0.5mm of brass)
2.Nominal holding force:120N/cm2

Innovatine solution for tool change,electric permanent magnetic chuck,electric chuck for plastic chuck.

Minut Pole Permanent Magnetic Chuck

Electro magnetic chuck is a clamping tool for cnc machine and milling machine. 5-side processing is available for Electro magnetic chuck.

3.Parrallel fine pole pitch:6 mm(4mm of steel+2mm of brass)
4.Nominal holding force:80N/cm2

Suitable for high precision angle grinding
MCC1025,MCC1250,MCC1530,MCC1535,MCC1545,MCC2250,magnetic chuck,magnetic tools

Electric permanent magnetic chuck

Powerful permanent Magnetic Chuck

permanent magnetic chuck is a new clamping tool for cnc machine and grinding machine. 5-side processing is available for permanent magnetic chuck.

suitable for grinding and EDM application.
best for smaller and thinner workpiece

Round Electro permanent magnetic chuck

Electro permanent magnetic chuck is a new clamping tool for cnc machine and milling machine. 5-side processing is available for EP chuck.

Safety:
Constant and concentrated force
No electric power supply during clamping
Ergonomic in operation
No dispersion of magnetic flux

Poles pitch:12mm +3mm

MCS1018,MCS1025,MCS1225,MCS1530,MCS1545,MCS2040,MCS2050.magnetic chuck,magnetic tools