magnesium

Made by imported German steel 1.2888 which casted by special foundry technical, matrix organization has no air bubble, shrinkage defects,

1. Yellow 99% MGO tube
2. Cylinderfour holes rolling the wires
3. Length was about 4cm
4. Resist high temperature, thermal conductivity , insulate

Product feature:
Magnesium alloy thin plate is made by rolling extrusion pressure which has advantages of small density, light quality, high strength

1. 99.4% MGO tube
2. Four holes tube
3. Length was about 14cm
4. Resist high temperature, thermal conductivity , insulate
5. wire through holes

Magnesium ribbon is mainly suitable for protected coiled body, protect the high resistivity of electrolyte tank or
other steel structure or the surf

1. 99% MGO
2. Threaded tube
3. Length was about 6cm
4. Resist high temperature, thermal conductivity , insulate
5. wire through hole

1. high purity MGO tubes
3. Resist high temperature, thermal conductivity , insulate
4. wire rollings
5. Design per your request

magnesium die casting companies in China ,Die Casting alloy part type:Magnesium die casting alloy parts,Aluminum die casting alloy parts

1. 99.% MGO
2. MGO plate
3. Dimension was customer request
4. Resist high temperature and long using life
5. Insulating and thermal conductivity

1. 99% MGO tube
2. Single holes tube
3. Length was about 5cm
4. Resist high temperature, thermal conductivity , insulate
5. wire through hole

1. Yellow 99% MGO tube
2. Multihole tube
3. Length was about 7cm
4. Resist high temperature, thermal conductivity , insulate
5. wire rolling

1. 99% MGO tube
2. Wires passing through both sides
3. Length was less than 7cm
4. Resistant high temperature, good electric, heating, insulate

magnesium die casting companies usa,Die Casting alloy part type:Magnesium die casting alloy parts,Aluminum die casting alloy parts

1. 99.4% MGO tube
2. rolling the wires through the tube
3. Length was about 10cm
4. Resistant high temperature, thermal conductivity , insulating

1. 99.% MGO
2. MGO plate
3. Dimension was customer request
4. Resist high temperature and long using life
5. Insulating and thermal conductivity

1. 99.3% MGO blocks
2. four holes rolling the wires
3. It also can be designed per your request.

1. White 99% MGO
2. MGO bushing part
3. Length was about 4cm
4. Resist high temperature, thermal conductivity
5. Insulating

1. 99.3% MGO
2. Threaded tube
3. Length was about 8cm
4. Resist high temperature, thermal conductivity , insulate
5. wire through hole

1. White 99.4% MGO bushing
2. Single hole special tube
3. Length was about 7cm
4. Resist high temperature, thermal conductivity , insulate

1. Yellow 99% MGO tube
2. Special thread tube
3. Length was about 8cm
4. Resist high temperature, thermal conductivity , insulate

1. 99% MGO tube
2. Wires passing through both sides
3. Length was less than 7cm

1. 99.4%MGO tube
2. Flat holes rolling the wires
3. Length was about 12cm

1. 99.3% MGO
2. MGO ring
3. Dimension was customer request
4. Resist high temperature and long using life
5. Insulating and thermal conductivity

1. 99% MGO
2. MGO connecting part
3. Dimension was customer request
4. Resist high temperature and long using life
5. Insulating

1. White 99% MGO
2. Insulation plug
3. Dimension was per customer request
4. Resist high temperature, insulate
5. Big capacity

1. 99% MGO connecting part
2. Special shape
3. Dimension per customer
4. Resist high temperature,
5. thermal conductivity , insulate

1. Grey 99% MGO tube
2. Flat shape tube
3. Length was about 6cm
4. Resist high temperature, thermal conductivity , insulate
5. wire rolling

1. 99.% MGO
2. MGO plate
3. Dimension was customer request
4. Resist high temperature and long using life
5. Flame uniformly pass through holes

1. 99.3% MGO
2. MGO plate
3. Dimension was customer request
4. Resist high temperature and long using life
5. Insulating and thermal conductivity

1. Resist high temperature, thermal conductivity , insulate
2. wire rolling