lsa module

It can be fixed in different lsa module and back mount frame in the telephone lines

10 pair 2-pole arrester magazine for 10pair LSA
module,with cover
Pin:Phosphor bronze with silver-plated
Dimension:113x23x41mm

It can be fixed in different lsa module and back mount frame in the telephone lines

18 Way Stainless steel back mount frame for 10 pair LSA module/Krone 19" rack

INSERTION TOOL

10Pairs disconnection or connection module for telecommunication and data networks.

Transparent cover for additional dust protection of 100 pairs mounting blocks, fastened directly

90 Pair Mounting Frame for 19 inch Rack

8Pairs disconnection or connection module for telecommunication and data networks.

It is fixed onto the 10 pairs lsa disconnection module for earth grounding

Designed to plug into a Disconnect Block to open a pair of contacts

It is used for LSA modules, which forms the protection circuit for the protection of exchange room equipments and personnel against over voltage

1) It is either wall mounted or back-to-back for free standing applications. 2) It is available in single and double vertical versions.

1) is used for the cross connection and terminations between trunk cable and the distribution cables
2) also called Cross Connection Cabinet (CCC)

Without ADSL splitter, signals or echoes from analog devices at the top of their frequency range can result in reduced performance

1) It is installed with stainless steel back mount frames
2) suitable for LSA disconnection modules.

It is located in the central office terminateing the cables leading to subscribers on one side (line/external side)

1) Made of highly flame retardant ABS
2) Flammability according to UL 94 FV0
3) Smallest distribution box designed for indoors

It is the device that uses low-pass and high-pass filters to direct analog voice and DSL signals to different lines.

1) It is also called Cross Connection Cabinet (CCC)
2) It is used indoor and for copper cables

It is used for mounting 10 pairs LSA modules. It is 19" rack mounted type and has 4 cable rings for neat wiring.

1) 100 pairs
2) key locking
3) Outdoor DP box
4) Outdoor 30 pairs DP box
5) distribution box...

1) It is used in terminating cables of secondary telephone network to the cable pairs of subscriber line
2) It is for outdoor applications

The housing consists of body and cover, which house LSA modules on the back mount frames.

This DP box is used in terminating cables of secondary telephone network to the cable pairs of subscriber line

It is used for mounting 10 pairs LSA modules. It is 19" rack mounted type and has 4 cable rings for neat wiring.

It is used for mounting 10 pairs LSA modules. It is 19" rack mounted type and has 4 cable rings for neat wiring.

It consists of the housing and LSA modules. The housing consists of body and cover

1) 30 pairs
2) screw locking
3) Indoor DP box
4) Indoor 30 pairs DP box
5) LSA module

1) 30 pairs
2) screw locking
3) Indoor DP box
4) Indoor 30 pairs DP box
5) LSA module