kevlar fiber packing

Kevlar Rope packing is made of Du Pont's aramid yarn impregnated with PTFE dispersion and processed with lubricant. braided into square cross section.

Aramid Fiber Packing /Aramid Fiber Packing with PTFE

The packing is manufactured in the following procedures: polyacrylonitrile fibre is heated into carbonized fibre.

Temperature -100-+300
Pressure 35MPa
linear velocity 15m/s
Chemical Resistance PH value 2-12

Double handle control system
Sinmens PLC control system

Price:US$0.3;Productivity:6000KGS PER DAY;Min. Order:3 pcs;Packing:WOODEN CASE;Transportation:sea;DeliveryDate:5days;PaymentType:T/T;Trademark:QS;Spe

Less maintenance, easy to install, will not wear the pump shaft or the valve rod. The Ramie dipping PTFE can be required

The cotton fiber packing is braided from cotton yarns which had been pre-impregnated. Intensively re-impregnated during braiding.

Ceramic fiber packing
1. Economical packing
2. Low maintenance, easy to control.

CARBON FIBER PACKING/Carbonized packing/Pan Fibre packing

Braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing.

It is a braided packing made of Aramid fiber. This packig can bear higher-pressure applications than other types of braided packings.

Price:US$10.0;Productivity:120000kg;Min. Order:1 kg;DeliveryDate:20days;Trademark:HuaKai;

Temperature -100-+300
Pressure 35MPa
linear velocity 15m/s
PH Value 2-12

Carbon Fiber Packing
The packing is woven of strong carbon fiber after softening treatment and impregnated with the mixture of fine graphite po

1.Max. working temperature: -75 ~ 260oC
2.Max. working pressure:1.5 Mpa(rotary pump)
3.Cross Section: 1/8" ~ 2"
4.Density: 1.45 ~ 1.55g/cc

1. Packing made of synthetic fiber yarns
2. Packing needs impregnating with block agents, lubricants
3. Economic seal packing choice

Texturized fiberglass braided round packing, diameter: 3mm-50mm, roll length:10m-200m, weight: 25g/m-1950g/m, continuous temperature resistance:550℃

Carbon Packing is made from carbonized fiber yarn treated with graphite particles, and then is braided to form packing.

silica gel packing is made of silica core + glass fiber casing+ silicone coating,

WEALSON is manufacturer and exporter of gasket materials,gaskets and gland packing,we can offer products with good quality and low price.

JX305 CARBON FIBER PACKING
The packing is woven of strong carbon fiber after softening treatment impregnation with the mixture of fine graphite

info(at)acsealing com Pure carbon fiber packing is Braided of caebon fiber? impregnated with proprietary lubricants and PTFE,? it has High pressure an

AT511L1 Comparing with the yellow aramid fiber packing, the Nomex Fiber Packing does not require high rigidity of the shafts.

High strength carbonized fiber packing is mede from imported carbonized fiber. And it is impregnated with PTFE latex, nami level graphite powder or ot

WEALSON Pure Ptfe Fiber Packing is made of pure PTFE yarn, there are no PTFE latex and lubricant.

Braided from strong carbon continuous yarns after softening, impregnated with proprietary lubricants and graphite particles, which fill voids

PTFE fiber packing is a pure yarn packing braided into square cross section and impregnated with PTFE dispersion.
High cross-sectional density an

Made of polyacrylonitrile filament through reinforcing, braiding and impregnated with PTFE.
Size: 3mm--50mm

High Water Based Packing is mainly used for emulsion, water and oil.