inserts

1.Metric,Imperial,UNC,UNF,UN
2.Free-running inserts 11k
3.Large quantity is in store
4.More saving for your purchase

CCMT Tungsten Carbide Turning Inserts,Turning And Grooving Inserts

Materials:SUS,Bronze,Alloy
Size:M2-M48
Internal Threaded inserts

2 pin Swiss plug insert with insulation(10A hollow plug switherland) switzerland plug insert

For the installation of a screw is more convenient and quick, reducing wear and tear.

1. More than 20 years' experience.
2. Professional engineer and technology.
3. ISO9001: 2015 certificate.
4. Feedback within 24 hours

PCBN (polycrystalline cubic boron nitride ) is a new kind of super hard material, which is a composite of CBN(cubic boron nitride) under thigh voltage

Small Precision Insert Molding
 
 
No MOQ (Minimum Order Quantity)
<

wire insert repair kit.including thread inserts of 3 lengths,twist drills (up to M 16),manual tap of HSS,installation mandrel,tang break-off tool

Introduction to PCD turning cutting tools insert
PDC cutter is made of diamond micro-powder and hard tungsten carbide under high temperature and hig

Keenserts provide high strength and reliability and are designed to provide high resistance to rotation and pull-out loads.

thread insert is a fastener element that is inserted into an object to add a threaded hole.
It is made of high strength, precision.

Keenserts provide high strength and reliability and are designed to provide high resistance to rotation and pull-out loads.

Keenserts provide high strength and reliability and are designed to provide high resistance to rotation and pull-out loads.

APGT Carbide Inserts For Aluminum Cutting,Aluminum Inserts

Size: 3 3/4'' 2 15/16'' 6 1/2'' 8 1/2'' 12 1/4'' 17 1/2'' etc
Type: TCI and MT bits
Condition: new or used

1. helicoil inserts
2. helicoil kit(tap/spanner/drill/punch and some helicoil inserts)
3. 304SS/HSS
4. ISO9001 products
5. Wholesale

1. helicoil inserts
2. helicoil kit(tap/spanner/drill/punch and some helicoil inserts)
3. 304SS/HSS
4. ISO9001 products
5. Wholesale

1. Name: M12*1.5-M18*2.5helicoil insert tools
2. Length of helicoil after installation:10.4mm (M10*1.25)
3. Application: insert helicoils

Tianyi cashmere products co.,ltd. Which a manufacture and exporter of cashmere,wool,silk cashmere made scarf shawl and other assesories. Our prodcts:

No pre-tapping required
Very high pull-out resistance
Unlimited thread re-usability
Wide variety of styles to fit almost every application

1.Size:M4*0.7 self tapping inserts
2.Material:Carbon Steel/ Stainless Steel
3.Drill Diameter:Aluminium Alloy:6.0-6.1mm
4.100,000 specs stored

1. Size: M4*0.7 self tapping inserts
2. Material: Carbon Steel/ Stainless Steel
3. Length: 6mm
4.100,000 specs stored for you

EUROPE VDE PLUG INSERTS

EUROPE VDE PLUG INSERTS

plug insert schuko vde PLUG INSERT TURKEY 4.0MM 4.8MM MIDDLE EAST PLUG INSERT

plug insert schuko vde PLUG INSERT TURKEY 4.0MM 4.8MM MIDDLE EAST PLUG INSERT

Simple, economic insert bearing units are widely used in agricultural machinery, construction equipment, textile machines, conveyor systems

Stamped nickel plated brass inserts for PPR molding, applicable for cold and hot water adduction in hydro-sanitary systems.

Keenserts provide high strength and reliability and are designed to provide high resistance to rotation and pull-out loads.