injection machine

1.Euromap 67 robot connection;
2.42mm screw;
3.CE standard;
4.Solid relay for heating;
5.Export to Euro-market

High mixing effect
Color mixing
Alloy steel with high hardness
Bear high injection pressure

good service ,high quality, long life for using,

1.screw and barrel accessories
2.Material:alloy steel 42CrMo(AISI 4140)
3.ISO 9001:2008 approved
4.treatment :Nitriding treatment

Plastic Injection Machine (FT90)

As long as max mold weight is not exceed, mold dimension is allowed to exceed platen area or sometime even machine platen area.

1, With the state of the art computer controlled system to gain the machinery more efficiency and reliability.
Preset technical parameters.

INJECTION MACHINE series1

1.Automatic mode
2. advanced controller
3.screw speed measurement equipment
4.T-shot

Min. Order:1 PC;Trademark:SOUND;

1. ISO9001:2008, CE optional
2. T-slot
3. One year warranty
4. Worldwide market, established oversea sales network
5.World known valves brand

High Strength barrel head for injection molding machine
Blackened or hardened for various situation
Alloy steel optional

With 15 years' experience to our credit, we have been able to produce the most important components of a plastic machine-bimetallic barrel and screw

1.accessories of screw and barrel
2.Material:alloy steel 42CrMo(AISI 4140)
3.ISO 9001:2008 and SGS approved
4.treatment :Electroplate hard-chrome

Plastic Injection Machine (FT160)

there is no extra energy consumption due to output volume changes according to load. in the phaseof holding pressure,servo motor lowers rotate and con

The declared magnetic performance has been calculated with the full coverage of each pole, with a perfect contact on mild steel plate.

double head
three color three density and transparent PU soles
Can produce two different material
It 's used for making safety shoe, leisure shoe,

INJECTION MACHINE series

1.injection molding machine
2. special design for eco-friendly small toys making
3. Injection weight 34 grams
4. Low noise

Trademark:SOUND;

1.High-response hydraulic system design
2.Pressure and flow proportional control.
3.World famous brand hydraulic components.
4. Less cycle time

New replacement screws and barrels from China for lower cost than refurbished ones. Try it and believe it, with satisfactory quality and cost saving f

1.injection molding screws barrels
2.Material:38CrMoAlA(JIS SACM645)
3.ISO 9001:2008 approved
4.treatment:heat-treatment

1, With the state of the art computer controlled system to gain the machinery more efficiency and reliability.
Preset technical parameters.

A magnetic clamping mould avoids deformation and avoid the effect of internal tension.Clamping force evenly distributed throughout the contact surface

Trademark:SOUND;

Torpedo with various kinds
Through hardened steel

1.Small,good to make mini plastic parts such as gears,chips..
2.Servo motor
3.Injection weight 64g
4.30days lead time
5.Screw dia.28 or 30mm

1.High-response hydraulic system design
2.Pressure and flow proportional control.
3.World famous brand hydraulic components.
4.Stable running