infrared quartz heater

Medium wave quartz heating element
1.Coating:ceramic white
2.Peak wavelength: 2.8-4um
3.Function: for glass heating and drying

Double tube Infrared emitter with gold reflector
1.Quartz wall thickness:2mm
2.Coating:Golden/Ceramic White
3.Function: for infrared heating oven

Medium wave quartz heating tube for drying
1.Quartz wall thickness:2mm
2.Peak wavelength: 2.8-4um
3.Function: for powder coating drying

Quartz Infrared Lamps
1. Heating Filament: Tungsten
2. Diameter :23*11mm
3. 220VAC 1000Watt
4. Instant On/Off ...

Medium wave infrared emitter for laminated glass
1.Coating:ceramic white
2.Peak wavelength: 2.8-4um
3.Function: for glass heating and drying

Single Tube Infrared Heater Lamps
1. quartz tube diameter : 23*11mm/33*15mm
2. length:1280mm
3.220v 1700w
4.reaction time : 2-4 minutes

Shortwave quartz heating tube for printing
1.227mm OVL 127mm HL, 235V/500W
2.Application: Glass Industry IR oven
3.Laminated glass drying heater

Shortwave twin tube quartz heating element
1.227mm OVL 127mm HL, 235V/500W
2.Application: Glass Industry IR oven
3.Laminated glass drying

features of ir lamps
1.high efficient
2.instant on and off
3.long life and consistent output
4.flexible product capacity...

1.energy efficient drying

2.high quality finish
3.Infrared emitters are precisely adjusted with regard to voltage and power.
4.Easy installation

1.filament material used for electrical infrared heaters is tungsten wire
2.quartz glass because it has a hotter melting point than standard glass.

1. heating filament: Ni-Cr or Fe-Cr-A1 resistance wire
2. IR wavelength between 2-4 um
3.Operating temperature 900° C
4.Response time around 1 min

1. Peak Wave Lengt: 0.75-1.4um
2. Response Time : 1second
3.heating material : tungsten wire
4.warranty time:5000hours
5.Voltages: 80-600v

1. heating material : Alloy resistance
2. diameter: 10,11,12,13,15,18,20,23*11,33*15mm
3. application: a wide range of industrial heating and drying

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000Hs
5.Max overall length: 6400mm

1.Short-Wave: 200 Watts/linear in.
2.Voltages: 120VAC, 240VAC, 480VAC
3.Available with straight wire leads, quick-disconnect sockets and 90℃ leads

1.Short-Wave: 200 Watts/linear in.
2.Voltages: 120VAC, 240VAC, 480VAC
3.Available with straight wire leads, quick-disconnect sockets and 90℃ leads

1.Short-Wave: 200 Watts/linear in.
2.Voltages: 120VAC, 240VAC, 480VAC
3.Available with straight wire leads, quick-disconnect sockets and 90℃ leads

1. Lamp data:300mm OVA length,200mm HL,230V/1500W
2. Application: Semiconductor Wave soldering machine
3. Model no:SWIR23TL300

1. Carbon IR heater with gold reflector
2. Applied industry: Film stretching machine
3. Carbon Peak wavelength: 2.4-2.7um.

Medium Wave Infrared Heater Lamps
1. diameter of quartz tube : 33*15mm
2. overall length:1800mm
3. 400v 4100w
4. reaction time : 2-4 minutes

1. Stable Surface Temperature
2. Durable for high temperature
3.Luminous or high intensity
4.Fast response time:1s
5. High efficiency

1.Wave Length - short wave 2.6-4.2um
2. Response Time : 1-2 minutes
3.Diameter:10,11,12,13,15,18,20,23*11,33*15mm
4. Applications : Glass printing

1. Peak Wave Lengt: 0.75-1.4um
2. Response Time : 1second
3.heating material : tungsten wire
4.warranty time:5000hours
5.Voltages: 80-600v

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000Hs
5.Max overall length: 6400mm

1. Instant heat : More than 90% emission within 2 mins
2. Clean: No byproduct, no Pullution
3. Safe : Quartz envelope, heat shock resistance

1.Filament temperature: 1500-2300 C
2.Applied industry:Electronics panel preheating IR panel
3.Peak wavelength of carbon medium wave: 2.4-2.6um

1. Power density of this type: about 36W/CM;
2. Function of infrared radaition: direct heating,save energy
3. Application: Reflow soldering machine

Short wave double tube ir heater lamp
1. Peak Wavelength range: 1.0-1.4um;
2. Response time: 1 second;
3. Max Temp: 950 Degree C.

1. Size: 21*45*15mm;
2. Function: Fixed the termnal and pinched part of the tube
2. Applied method: Adhere to the shortwave infrared pressed part