infrared heating tube

Shortwave single quartz heating tube
1.Voltage:80-600V
2.Power:300-12000W;
3.Applied Industry: Screen printing glass Drying

1.alloy wire and tungsten wire as the heating filament
2.quartz glass because it has a hotter melting point than standard glass.
3.Multiple coating

1.alloy wire and tungsten wire as the heating filament
2.quartz glass because it has a hotter melting point than standard glass.
3.Multiple coating

Quartz Infrared Lamps
1. Heating Filament: Tungsten
2. Diameter :23*11mm
3. 220VAC 1000Watt
4. Instant On/Off ...

1. Transparent no reflector IR heating tube
2.1120mm OVL 1000mm HL, 480V/6000W
3. Application: Leather stamping heating equipment

1. 1100mm overalll length,1000mm active length
2. 2750W/240V for Double shortwave quartz heating tube
3. Roland printer for paper

Twin Tube IR Lamps
1. dimensions 11x23mm
2. using tungsten wire as filament
3. response time around 1~2 seconds
4. max. overall length up 4M

1. 1100mm overalll length,1000mm active length
2. 2750W/240V, Shortwave double heating quartz tube
3. Auto glass drying oven

Quartz Infrared Lamps
1. Heating Filament: Tungsten
2. Diameter :23*11mm
3. 230VAC 1000Watt
4. Instant On/Off ...

Shortwave quartz heating tube for printing
1.227mm OVL 127mm HL, 235V/500W
2.Application: Glass Industry IR oven
3.Laminated glass drying heater

1. Shortwave double tube IR heating lamps
2.1120mm OVL 1000mm HL, 480V/6000W
3. Application: Leather stamping heating equipment

Shortwave quartz tube heating lamps
1.Model No:SWIR10370x,10mm diameter
2.370mmOVL280mmHL,235V/1000W
3.Application:Glass Autoclave oven

1.energy efficient drying

2.high quality finish
3.Contactless heat transmission, no material adheres to the heat source
4.fast response

1. heating filament: Ni-Cr or Fe-Cr-A1 resistance wire
2. IR wavelength between 2-4 um
3.Operating temperature 900° C
4.Response time around 1 min

1.Wave Length - short wave 0.75-1.5um
2.Overall Length: 90mm-4600mm
3.Response time : 1 second
4.warranty: 5000 hours
5.diameter:10,12,15,33*15mm

1.Short-Wave: 200 Watts/linear in.
2.Voltages: 120VAC, 240VAC, 480VAC
3.Available with straight wire leads, quick-disconnect sockets and 90℃ leads

medium wave infrared heater lamps
1.Temp of heating element: 800-950℃
2.Response time is 1 minute
3.warranty time : 20000 hours

1. Quartz infrarred tube heating element.
2. Applied industry: Film stretching machine
3. Carbon Peak wavelength: 2.4-2.7um.

1. heating filament: Ni-Cr or Fe-Cr-A1 resistance wire
2. IR wavelength between 2-4 um
3.Operating temperature 900° C
4.Response time around 1 min

Glass Tube:99.9% Pure Fused Silica Quartz Sealed
Filament Material:Tungsten
Filament Temperature:1800 - 2400C℃(3300 - 4400F)
reaction time:1s

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

1. Carbon heat element electric heating panels systems
2. Application: Plastic floor heating module
3. Lamp length1520mm/element length 1400mm

single Shortwave infrared heating lamps
1.Diameter: 10mm,12mm,13mm,15mm,18mm,20mm
2.Length : 90mm - 4000mm
3.Power : 100-6000W
4.Voltage: 12-480v

single Shortwave infrared heating lamps
1.Diameter: 10mm,12mm,13mm,15mm,18mm,20mm
2.Length : 90mm - 4000mm
3.Power : 100-6000W
4.Voltage: 12-480v

Twin tube medium wave quartz heating tube
1.Cross section: 33*15mm
2.Coating:Golden/Ceramic White
3.Function: for glass laminating

Shortwave quartz tube IR heating tube
1. Voltage:80-600V
2. Power:300-12000W;
3. Applied Industry: Selective soldering machine

1.Heat is applied precisely where and only for required
2.infrared radiation requires neither contact nor intermediate transfer medium
3.clean

1. Peak Wavelength range: 0.75-1.4um
2. Response time: 1s
3. Max Temp: Temp of heating element: 1800-2400℃
4. Filament Material: Tungsten

Our electric heating tubes are used for heating up water,oil,air,gas,chemical,etc

shortwave infrared heater lamps with reflector can save more energy and help clients to realize the good result in a shorter time.