inconel alloy wire

1.Good heat resisting strength at high temperatures
2.Good resistance to oxidation
3.Diameter: 0.05mm-10.0mm

FeCrAl 1Cr13Al4 Resistance Heating Wire is made of iron chromium aluminum alloy. The scaling temperature is 650°C (1202°F).Max. operating temp. 950°C.

CCS wire with steel core and outside plating of copper.
-Prompt delivery, quality assured
-Competitive price with good quality

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000hours
5. diameter : 23*11mm 33*15mm

Perfect aftersale service
It can be done according to your demands

Wire type: SiCa CaFe SiAl
Quality certificate: COA, CIQ, SGS ISO9001:2008
MOQ: 3MT
Coil Weight:1.3-2ton/coil
Packing: Stell pallet with iron cage

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

sincere cooperation
Mutually beneficial
Joint development

Ni50Fe Nilo wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy.Wire:Diameter:0.03mm-10mm. Used in laminated cores.

High-resistivity nickel-chromium alloys for use up to 1250º C (2280º F).

electrical heating
wire-wound resistor
metallurgical industry
good mechanical workability
good weldability...

1.high electrical conductivity,thermal conductivity and chemical stability,
2.easy to produce and good tensile strength.

Copper Nickel Alloy CuNi23 Wire is a copper-nickel alloy wire(CuNi alloy) with medium resistivity for medium-low temperature resistances

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

1.Wave Length - short wave 2.6-4.2um
2. Response Time : 1-2 minutes
3.Diameter:10,11,12,13,15,18,20,23*11,33*15mm
4. Applications : Glass printing

70/30 Copper Nickel Alloy Wire:Better Resistance to Corrosion, high resistance to sea water environments& Bio Fouling in Sea Water.Dia.0.05mm~10.00mm

Contact Sliver Alloy has AgSnO2InO3(8~14.5), AgSnO2(10~14.5), AgSnO2(8~14.5), AgNi(8~20), AgFe(10), AgZn(8~10), PAg, FAg, AgBiLaT, AgCdO(10~17)

1.High resistance, low temperature coefficient
2.Good corrosion resistance under high temperature
3.Diameter: 0.05mm-10.00mm

medium wave infrared lamp
1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000hours

Higher maximum temperature in air; Longer life;Higher surface load;Better oxidation properties; Lower density;Higher resistivity;Higher yield strength

Wire type: SiCa CaFe SiAl
Quality certificate: COA, CIQ, SGS
MOQ: 3MT
Production Capacity: 1000tons/month
Specification: Si55ca30 Ca30Fe70

Contact Sliver Alloy has AgSnO2InO3(8~14.5), AgSnO2(10~14.5), AgSnO2(8~14.5), AgNi(8~20), AgFe(10), AgZn(8~10), PAg, FAg, AgBiLaT, AgCdO(10~17)

Copper Clad Aluminum Magnesium Alloy Wire
1, Diameter: 0.10~2.05 mm
2, Copper Volume: 10-15%
3, Density: 2.85 g/cm3

Nichrome alloys have higher hot&creep strength; Better ductility after use; Higher emissivity; Non-magnetic; Better wet corrosion resistance.

Wire type: SiCa CaFe SiAl
Quality certificate: COA, CIQ, SGS
MOQ: 10MT
Production Capacity: 1000tons/month
Specification: Si55ca30 Ca30Fe70

Good quality & very competitive price
Short delivery time
Perfect aftersale service

1.High resistivity and good resistance to oxidation
2.Good deformation ability, thermal stability, mechanical character
3.Diameter:0.05-10.0mm

single tube carbon infrared heater
1. diameter :11mm
2. length:500mm
3.120v 300w
4. application: patio heater spare part

Copper Nickel 10 Alloy Wire Mesh/Screen: resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

1.Good deformation ability, thermal stability
2.Good heat resisting strength at high temperatures
3.Diameter: 0.05mm-10.0mm