garden drill tools

coal mine petroleum tools
1.water well drill bits
2.Size: from 3" to 26"
3.Certificate: ISO&API
4.Seal type:Metal/Rubber...

Drill stem testing tools Champ XHP packer is 105Mpa in casing size 7" and 9 5/8", Working Temp. 400F which with bypass, J slot included.

DST Tools TubingTester Valve
Factory Direct
Halliburton type
Manufactured as per required
full- opening, annulus pressure-operated valve

The casing tong is a kind of hydraulic power tong applied for the oilfiled drilling operation. The casing power tong is manufactured as per API Spec.

1.Standard: API 7-1
2.Material: 4145H MOD, 4330V MOD, Non-mag material
3.Delivery time: around 20 days
4.Hard-facing:HF1000-HF5000
5. Use: Well

1.It is for handling flush joint pipe and drill collar.
2.API Standard
3.Material:steel
4.Type:WA-C,WA-T.

The 3 7/8" x 15000 psi sleeve type drain valve is used for slim hole drill stem testing operation in cased hole, it is as per NACE MR 0175 standards

Drill stem testing tools Hydraulic Circulating Valve is 105Mpa in OD5" and 3 7/8", Working Temp. 400F used to circulating a well after testing

1.Alloy steel,low carbon steel,stainless steel,etc
2.OD:152.2-711.2mm
3.Timely delivery
4.Factory
5.API Spec.

product model:Hydraulic Jar
Type:Halliburton
size:3 7/8"
Application:Drill stem testing
Working pressure:10000psi ~ 15000psi...

The Power Tong ZQ203 is designed and manufactured according to API spec. ZQ 203 power tong is used to handle the drill pipe in drilling operation.

product model:Hydraulic Jar
size:5"
Application:Drill stem testing
Working pressure:10000psi ~ 15000psi
Working condition:HPHT...

API SD drill pipe slip accommodate drill pipe from 2 3/8 inch to 5 1/2 inch (60.3-139.7mm)O. D.

product model:Hydraulic Jar
Type:Halliburton
size:3 7/8"
Application:Drill stem testing
Working pressure:10000psi ~ 15000psi...

Drill stem testing tools Radial shock absorber is for cased hole full bore type in size casing 7", Working pressure 105Mpa, other size can be availabl

API Spiral Drill Collars
manufactured as per requirements
Material: AISI 4145H
Factory direct
realiable quality with good service

The Hollow Plug Impact Reversing Sub is a reversing circulating tool used in open hole drill stem testing and operated by inner pressure.

5" Full Bore Hydraulic Jar
Application:DST Tools
Connection thread: 3 7/8″CAS.B×P
working pressure:15000psi
Competitive price and good service

Drill stem testing tools vertical shock absorber is for cased hole full bore type in size 3 3/8" and 5" in owrking pressure 105Mpa, run below TCP guns

1.Standard: API Spec 7-1
2.Material: AISI 4145 H Modified Alloy Steel
3.Export Percentage: 95%
4.Supply Ability: 1000 sets per month
5.MOQ: 2 set

The Gauge Carrier 5" x 15000 psi with 4 testing gauge is a kind of full bore DST tools for the oil well downhole testing operation in cased hole,

Drill Pipe Power Tong :The applicable pipe OD is 3 1/2"~8", 2 7/8"~5", 2 1/2"~3 1/2",ZZTOP offers the power tong in high quality with reasonable price

Working condition:High pressure high temperature(HPHT)
Size: 5"
service:H2S, CO2
Working pressure:10000psi ~ 15000psi
Application:Drill Stem Test

Drill stem testing tools including Packer, safety joint, Tester valve, circulating valve and other acc. with 5" or 3 7/8" OD, various connection type

1:Tool Joint: NC26, NC31, NC38, NC40, NC46, NC50
2:Type of Tool joint: NC, IF, FH, XH, REG
3:Material: 40Cr, 35CrMo, 4137H
4: Good after service

Rupture Disk FUL-FLO Sampler,Annuluspressure operated sampling tool which retains full ID after sample has been collected. Sampling volum 1200cc.

product model: DST tools 11 3/4" API standard RTTS Packer
Size:18 5/8"
Standard: API
Service:H2S, CO2
usage: drill stem testing...

1.Standard: API Spec 7-1
2.Material:AISI 4145H Modified ally steel
3.length:9.150-9.450m
4.With high quality
5. steady supply

5" x 15000 psi Rupture Disc Safety Circulating Valve is used for drill stem testing operation in cased hole, conformed with NACE MR 0175 specification

Drill stem testing tools tubing string testing valve TST is for cased hole full bore type in size 3 7/8" and 5" in owrking pressure 105Mpa.