garages

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

54" cable drum(Garage Door)
HIGH LIFT - CABLE DRUM 54 HL-54"
MAXIMUM DOOR HIGH:120" + HI LIFT
RATED LIFTING WEIGHT PER DRUM:275 LBS

54" HL cable drum (3 Screw) EUR.GARAGE DOOR PARTS
HIGH LIFT - CABLE DRUM 54 HL - LD54" 3Screws
MAXIMUM DOOR HIGH:180" + HI LIFT
RATED LIFTING

!5" R Horizontal Track
12" R Horizontal Track
Vertical Track
Angles

HIGH LIFT - CABLE DRUM 54 HL - LD54"
MAXIMUM DOOR HIGH:180" + HI LIFT
RATED LIFTING WEIGHT PER DRUM:500 LBS

DEC:Rotary Joint
Include screw
Finish :black zinc plated

DEC: Industrial Joint Angle Iron
The angle iron is made of 2.5mm steel and is provided
with slotted holes and suitable for the fixing of track.

DEC:Left & Right Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Suitable for residential

CABLE DRUM 12'
MAXIMUM DOOR HEIGHT: 12' 1"
RATED LIFTING WEIGHT PER DRUM: 375 LBS
MAXIMUM CABLE DIAMETER: 5/32"(4mm)

32" cable drum(Overhead garage Door)
STANDARD LIFT - CABLE DRUM 32'
MAXIMUM DOOR HEIGHT:32' 1"
RATED LIFTING WEIGHT PER DRUM:1000 LBS

STANDARD LIFT - CABLE DRUM 18'MAXIMUM DOOR HEIGHT:18' 1"
RATED LIFTING WEIGHT PER DRUM:750 LBS
MAXIMUM CABLE DIAMETER:3/16" (5mm)

18 GAUGE HINGE # 1
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

6" Spring Fitting
1" bore(1-1/4"bore use parts#1404)
single thread for LH&RH wound springs
Maximum wire size- 4375" diameter
set includes(2)wind

5#Hinge
GDP1005
DEC:5#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC: Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.
Thicknes

DEC: Industrial Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.

‧11 GAUGE HINGE # 1 ~ # 12
‧BRIGHT ZINC PLATED 11 GAUGE STELL HINGE LEAVES
‧FULL BODY 3" WIDE ‧FOR USE WITH 7/16" DIAMETER STEM ROLLERS

DEC:Small Size Pusher Spring
The is Provided with 2 Inch rubber stop for use small door pusher
Thickness:2.5mm
Finish:zinc plate

PUSHER SPRINGS 27"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 27".15" COMPRESSION

2"black nylon rollers
4" zinc plated stem
rating 50 lb lading at 100000 8" door cycles

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

Track Bottom Bracket
DEC: Track Bottom Bracket,The bracket is suitable for inside cable fixing for 2 "tracks
The advised max door weight is 100kgs

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5mm
Finish

Description: Side Brackets
The bracket is provided with slotted holes and suitable for the fixing of tracks
Thickness:2.5mm
Finish:zinc plate

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2 5/8spring fitting
Finish:zinc plated

Industrial top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5m

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.