garages

Productivity:2000000PCS/M;Packing:Cartons on pallet;Transportation:BY SEA OR BY AIR;DeliveryDate:30-45DAY;PaymentType:T/T OR L/C;Trademark:CRB;Specif

1:Spring Break Protection
Bright zinc plated ,with a thickness of 3.5mm Suitable at the torsion spring stops ,
the shaft turning in the event of spr

1.Zinc plated wave plate;
2.Surface treatment on steel waved plate;
3.Honest supplier of wave plate;
4.Advanced garage waved plate production lines

Hydraulic Garage Jacks

2" SEALED NYLON ROLLER WITH ZINC PLATED STEM
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER
WHITE NYLON TIRE FOR QUIET OPERATION

DEC:3 Pulley
The pulley is made of 2 times 1.2mm cold rolled
steel riveted together,6 rivets proportionally spaced
lnner ring heat treated

1.Rapid open traffic within 2 hours
2.Easy to use
3.High adhesion & compression strength
4.High flexural strength
5.Small color difference

Safe and stable in running, and ensure its running and car safety.
The chain drive is designed in closed loop, stable in lifting and low noises.

Residential Bottom Bracket
DEC: Residential Bottom Bracket
Both left and right available
Thickness: 2.5mm
Finish: zinc plated

Lifted by four-point steel ropes, which can lower the car carrier plates to bottom.
Driven by motor chains, low noise, high running stability.

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

High in parking density, safe and reliable, high in automation and car access efficiency;
Ground or underground large parking garages or parking site

2" spring fittings
Max. wire size: 0.306" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

Multi-level parking garage above ground.
Galvanized platform with waved plate.
Hydraulic cylinder with chain drive
Fast lifting and falling speed

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2spring fitting
Finish:zinc plated

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5m

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

CABLE DRUM 120 HL
RATED LIFTING WEIGHT PER DRUM:500 LBS
MAXIMUM CABLE DIAMETER:3/16" SET SCREWS INST

400-8 standard lift
max.door height 8'1"
rated lifting weight per drum 265LBS
Max.cable diameter 1/8"

28 cable drums
Max.door height 28'1"
Rated lifting weight per drums 1100 LBS

DEC: 4015 Chain Hoist
6 6:1 reduced drive
Wall mounted
Includes:
1)41B60 sprocket,1 Inch bore ...

DEC:4020 Chain Hoist
4:1 reduced drive
Wall mounted
Includes:
1)41B36 sprocket,1 Inch bore ...

Description: Commercial Bottom Bracket
Thickness:2.3 mm, Finish: zinc plated

INSIDE NYLON T HANDLE,PLASTIC INSERT,REINFORCED NYLON,MATTE BLACK FINISH,USE WITH AUTO LATCHES AND KEYED T HANDLES, USING EITHER CABLE OR CHAIN

doors elegant shapes family flexible choices garage garage door garage door installation garage door parts garage door prices garage door repair Garag

6#Hinge
GDP1004
DEC:6#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC:A type Bracket
The bracket is left and right type,for the shutter doors
Finish: Zinc plate

2 5/8" spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

For Overhead Garage Door, Industrial Garage doors, Residential garage doors,Commercial garage door parts, sectional garage door parts, Rolling garage

‧KEYED T HANDLE,BRIGHT CHROME FINISH 
‧1 3/16" LONG BLIND MOUNT POSTS FOR 1 3/8" THICK
   DOORS 
‧ZINC PLATED 5/16" SQUARE X 3 3/4" LON